For SE servers, StorMan is installed as an add-on pack for the SE Manager on the Management Unit (MU). In the case of a multi-MU configuration (MU redundancy on the SE server or management cluster with two SE servers), StorMan is installed on each MU. Only one StorMan at a time is ever active for SHC-OSD.
In the event of a version change, perform the installation steps described in the "Operation and Administration" manual [13] in the SE Manager.
Network connection
Communication between SHC-OSD and StorMan is implemented over a LAN (TCP/IP). The internal management network (MNCPR) of BS2000 (Server Unit) to the M2000 (port: 4178) is used primarily for StorMan. The customer LAN can also be used.
Enter the StorMan connection data in the SHC-OSD parameter file after installing SHC-OSD (see “Parameters for operating ETERNUS DX/AF” in "Configuration of SHC-OSD").
StorMan requires a LAN connection to the managed storage systems. For details, see the “StorMan” manual [15]. The customer LAN can be used for the network connection.