Central administration
Central administration of the total storage system is supported. It permits the supported functions also to be managed on non-generated and/or detached units.
Security functions are available to prevent incorrect operation of the units. These are described in detail in section "Security settings of SHC-OSD".
Central monitoring
The units defined in BS2000 are monitored by default for storage systems. You can set central monitoring for the total storage system with
/MODIFY-SHC-PROCESSING STATE-CHANGE-POLLING=*PARAMETERS(SELECT-DEVICES=*ALL)
This causes all state changes to non-generated and detached units to be logged on the console by means of NDE0xxx messages.
CAUTION!
This setting is not recommended for very large configurations:
It can lead to losses in performance and increased CPU requirements for processing by SHC-OSD.
An extremely large number of console messages are generated.