The ETERNUS DX/AF storage systems from Fujitsu support mainframes and open systems. SHC-OSD supports and integrates storage systems ETERNUS DX/AF for all current BS2000 servers.
The following model series are supported in BS2000:
ETERNUS AF (AF650 S2/S3)
The ETERNUS AF storage systems are all-flash systems based on a SSD drive technology. They offer benefits such as ruggedness, shorter response times, low power consumption, low noise emission and no moving components.
ETERNUS DX500 S4/S5, DX600 S4/S5/S6, DX900 S5/S6, DX8900 S5/S6
(collectively referred to as ETERNUS DX)The ETERNUS DX storage systems offer the use of SSD, SAS and NL-SAS drive technologies. They also can optionally be configured completely with SSD drive technology.
ETERNUS DX/AF supports emulations of the D3435 disk type. For the BS2000 volumes, SHC-OSD supplies the information about the underlying drive technology.
The RAID functions RAID1, RAID5, RAID6 and RAID10 and also combined RAID functions can be used on ETERNUS DX/AF to create failure tolerant disk system.
Detailed information – also on the architecture and components of storage systems – is available in the product manuals which you can download from the internet at: http://support.ts.fujitsu.com/ > Storage > ETERNUS.