Error messages

3600	INDIRECT CALC-RECORD recordname FOR A DISTRIBUTABLE SYSTEM LIST SET CANNOT BE CHECKED IN REALM realmname AS SOME KEYS WITH THE SAME KEYLENGTH ARE NOT SPECIFIED Meaning The indirect CALC-KEY of the specified record type is to be checked, this being the member record type of a distributable SYSTEM-LIST set. This is not possible, however, because not all indirect CALC-KEYs and CALC-SEARCHKEYs which reside on the REALM concerned and have the same length are specified. Response Specify all indirect CALC-KEYs and CALC-SEARCHKEYs which reside on the REALM concerned and have the same length.
3601	INDIRECT CALC-RECORD recref CANNOT BE CHECKED IN REALM realm-ref AS SOME KEYS WITH THE SAME KEYLENGTH ARE NOT SPECIFIED Meaning The indirect CALC-KEY of the specified record type is to be checked. This is, however, only possible if all indirect CALC-KEYs and CALC-SEARCH-KEYs are specified which reside on the REALM concerned and have the same length. Response Extend RECORD or KEY selection. CALC-SEARCH-KEY keyref CANNOT BE CHECKED IN REALM realm-ref AS SOME KEYS WITH THE SAME KEYLENGTH ARE NOT SPECIFIED Meaning The specified CALC-SEARCH-KEY is to be checked. This is, however, only possible if all CALC-SEARCH-KEYs and indirect CALC-KEYs are specified which reside on the REALM concerned and have the same length. Response Extend RECORD or KEY selection.
3602	CHECK OF {SET/KEY} setref/keyref MAY BE IMPOSSIBLE. SOME REALMS WHICH MAY CONTAIN {OWNER-RECORD/MEMBER-RECORD/RECORD/TABLE}-OCCURRENCES ARE NOT SPECIFIED - IF THIS LEADS TO AN ERROR FURTHER NOTICE WILL BE GIVEN - IF THIS LEADS TO AN ERROR IT CANNOT BE DISTINGUISHED FROM A REAL CONSISTENCY ERROR Meaning A set or key is to be checked, but at least one member, owner, record or table is within realms which have not been selected by the user. The detected inconsistency cannot be diagnosed as consistency error at this point in time. Response Increase realm selection so that a complete set or key check can be executed.
3603	IT CANNOT BE CHECKED IF THE TABLE OF {SET/KEY} IS ANCHORED IN THE SYSTEM-RECORD/DBTT. REALM realmname WITH THE SYSTEM-RECORD/DBTT IS NOT SPECIFIED Meaning A set or key is to be checked whose table is anchored in a realm which has not been selected by the user. Response Enter appropriate realm names in the REALM statement and restart BCHECK.
3604	LOCATION CHECK OF RECORD recordname MAY BE IMPOSSIBLE. SOME REALMS WHICH MAY CONTAIN RECORDS ARE NOT SPECIFIED - IF THIS LEADS TO AN ERROR IT CANNOT BE DISTINGUISHED FROM A REAL CONSISTENCY ERROR Meaning The realm with the DBTT of the record type has been specified but not all the realms of the WITHIN clause. Response Increase realm selection so that a complete record check can be executed.
3605	CHECK OF {INDIRECT CALC-KEY/CALC-OVERFLOW-CHAIN} FOR RECORD recordname IS IMPOSSIBLE, BECAUSE ALL REALMS WITH [INDIRECT] CALC BUCKETS ARE NOT SPECIFIED Meaning The CALC areas of the specified record type that are to be checked cannot be found in the realm selection. Response Specify the realms required for the desired check.
3606	CHECK OF {INDIRECT CALC-KEY/CALC-OVERFLOW-CHAIN} FOR RECORD recordname MAY BE IMPOSSIBLE. SOME REALMS WHICH MAY CONTAIN [INDIRECT] CALC-BUCKETS ARE NOT SPECIFIED - IF THIS LEADS TO AN ERROR IT CANNOT BE DISTINGUISHED FROM A REAL CONSISTENCY ERROR Meaning The realm selection means that the indirect CALC area or overflow chaining cannot be fully checked. Response Increase realm selection for a complete check.
3607	CHECK OF INDICES IS IMPOSSIBLE, BECAUSE NO TOTAL CHECK IS SPECIFIED OR TYPE-CLAUSE-RESTRICTION IS GIVEN: THE INDEX-CLAUSE WITHIN {SET/KEY}-STATEMENT IS IGNORED Meaning The index space of tables cannot be checked within an incremental check or index checking is impossible due to the TYPE statement. Response Execute complete check or do without index check.
3608	NOT ENOUGH SPACE AVAILABLE FOR SORTFILE SORTWK Meaning Sort file has become too large.
3609	GLOBAL CONSISTENCY CHECK SUPPRESSED Meaning The global consistency check has been completely suppressed due to the omission of certain statements or specifications within a statement. The message may also be output if there is nothing to check because the database is empty and not because statements have been omitted. In the latter case, ignore the instructions under “response” Response The global consistency check is an important part of the overall consistency verification operation. Please determine whether global checks have been intentionally disabled.
3612	LINKNAME linkname CANNOT BE FOUND Meaning LINK-NAME entry DATABASE does not exist in the task file table. Response Assign database name via LINK-NAME=DATABASE and restart BCHECK.
3616	CHECK-STATEMENT IS MISSING Meaning A realm, record, set or key selection has been made without the check mode being specified in the control statements. Response Control statements can be entered interactively; the missing CHECK statement can be entered retrospectively. In batch mode, the statement should be inserted and BCHECK restarted.
3619	ACT-KEY-0 OR ACT-KEY-N OF SOME DBDIR CANNOT BE READ Meaning The first or last page of the DBDIR cannot be read. Response Inform system administrator; possible hardware error.
3620	BFORMAT NOT EXECUTED OR RESTRUCTURING IN PROCESS Meaning Record 00-09 has not been entered in DBTT1. Response Apply BFORMAT, or wait for BCHANGE/BALTER run to terminate, then restart BCHECK.
3622	A {VERSION-RECORD/CONSISTENCY-RECORD} IN THE {OLD/NEW} DBDIR CANNOT BE READ Meaning Error on reading the version or consistency record. Response Inconsistent DBDIR; roll back database to most recent version with consistent DBDIR.
3623	SORT-FILE SORTWK CANNOT BE OPENED Meaning A sort file created by the user cannot be opened or closed. A sort file to be created by BCHECK cannot be created. Response Delete any existing sort file, increase PAM limit for this userid and restart BCHECK.
3624	ERROR IN CHECK-STATEMENT. [CHECK-STATEMENT IGNORED] Meaning Syntax error in the CHECK statement. Response The statement can be corrected interactively. In batch mode, the statement should be corrected and BCHECK restarted.
3625	ERROR IN SCHEMA-STATEMENT. [SCHEMA-STATEMENT IGNORED] Meaning Syntax error in the SCHEMA statement. Response The statement can be corrected interactively. In batch mode, the statement should be corrected and BCHECK restarted.
3626	THE ASSIGNED INTERNAL FILE (LINK=BCHECK) GENERATED BY A PREVIOUS SUMMING-CHECK {IS OLDER THAN/DOESN’T CORRESPOND TO} THE ASSIGNED {OLD/NEW} DATABASE Meaning The result file is based on a previous error situation (earlier database version). The assigned result file contains errors or does not belong to the assigned database. Response Assign correct result file or database, or generate new result file.
3627	ERROR IN {REALM/SET/KEY/RECORD}-STATEMENT THE {REALM/SET/KEY/RECORD}-STATEMENT CONCERNED AND ALL INPUT UNTIL KEYWORD ’REALM’, ’RECORD’, ’SET’, OR ’KEY’ IS IGNORED Meaning Syntax error in the REALM/SET/KEY/RECORD statement. Response Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3629	THE ASSIGNED {OLD/NEW} DATABASE {IS OLDER/HAS A DIFFERENT SYSTEM-BREAK-BYTE} THAN THE INTERNAL FILE (LINK=BCHECK) GENERATED BY A PREVIOUS SUMMING-CHECK Meaning The assigned database (or copy) has a different updating level. Updates have been performed in the meantime. Response Check if the database has been restructured or recreated in the meantime. If differing record references are found, the BCHECK error messages are no longer reliable and a new result file must be generated by means of a new summing run.
3630	ERROR IN TYPE-STATEMENT (TYPE-NR type-number NOT ALLOWED). [TYPE-STATEMENT IGNORED] Meaning Syntax error in the TYPE statement. Response The statement can be corrected interactively. In batch mode, the statement should be corrected and BCHECK restarted.
3631	NO REALM TO CHECK Meaning The intersection of the specified realms and the realms permitted according to the CATALOG entry is empty. Response Specify realms to be checked or check CATALOG entries.
3632	SCHEMA-NAME IS MISSING OR DIFFERENT FROM DBDIR. USER-SCHEMA IS ASSUMED Meaning The user schema is used if the SCHEMA statement is illegal or missing.
3633	REALM realmname IS NOT DECLARED IN SCHEMA THE REALM-STATEMENT CONCERNED AND ALL INPUT UNTIL KEYWORD ’REALM’, ’RECORD’, ’SET’, OR ’KEY’ IS IGNORED Meaning  The indicated realm name cannot be found in the SIA. Response  Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3634	RECORD recordname IS NOT DECLARED IN SCHEMA THE RECORD-STATEMENT CONCERNED AND ALL INPUT UNTIL KEYWORD ’REALM’, ’RECORD’, ’SET’, OR ’KEY’ IS IGNORED Meaning  The indicated record name cannot be found in the SIA. Response  Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3635	SET setname IS NOT DECLARED IN SCHEMA THE SET-STATEMENT CONCERNED AND ALL INPUT UNTIL KEYWORD ’REALM’, ’RECORD’, ’SET’, OR ’KEY’ IS IGNORED Meaning  The indicated set name cannot be found in the SIA. Response  Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3636	KEY keyname IS NOT DECLARED IN SCHEMA THE KEY-STATEMENT CONCERNED AND ALL INPUT UNTIL KEYWORD ’REALM’, ’RECORD’, ’SET’, OR ’KEY’ IS IGNORED Meaning The indicated key name cannot be found in the SIA. Response Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3637	REALM realmname IS MARKED {AS TEMPORARY/AS NOT PRESENT/AS SWITCHED OFF /WITH HW-ERROR/AS NOT EXISTENT} THE REALM STATEMENT CONCERNED AND ALL INPUT UNTIL KEYWORD ’REALM’, ’RECORD’, ’SET’, OR ’KEY’ IS IGNORED Meaning The realm to be checked has been marked in the catalog as temporary / switched off / with hardware error / not existent in the SIA. Response Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3638	SOME {RECORD/REALM/SET/KEY} APPEARS IN MORE THAN ONE STATEMENT THE {REALM/SET/KEY/RECORD}-STATEMENT CONCERNED AND ALL INPUT UNTIL KEYWORD ’REALM’, ’RECORD’, ’SET’, OR ’KEY’ IS IGNORED Meaning A record, realm, set, or key name occurs at least twice. Meaning Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3639	NO KEYWORD FOUND WHEN ’REALM’, ’RECORD’, ’SET’ OR ’KEY’ EXPECTED ALL INPUT IS IGNORED UNTIL THE NEXT KEYWORD ’REALM’, ’RECORD’, ’SET’, OR ’KEY’ Meaning The REALM, RECORD, SET, or KEY statement is expected to follow the SCHEMA statement. Response Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3640	SET setname IS IMPLICIT OR DYNAMIC THE SET-STATEMENT CONCERNED AND ALL INPUT UNTIL KEYWORD ’REALM’, ’RECORD’, ’SET’, OR ’KEY’ IS IGNORED Meaning  The specified set has been defined as implicit or dynamic set in the SIA. Response  Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3641	ONLY IN THE PRIVACY-AND-IQF-SCHEMA DBDIR CAN BE CHECKED Meaning DATABASE-DIRECTORY has been specified in the REALM statement whereas the schema name is not PRIVACY-AND-IQF-SCHEMA Response Enter correct statement in interactive mode, or correct statement and restart BCHECK.
3642	KEY keyref IS NO SEARCH-KEY AND MUST BE CHECKED WITH THE SET-STATEMENT Meaning A key is to be checked whose set has not been selected by the user. Response Enter correct SET or KEY statement in interactive mode, or correct statement and restart BCHECK.
3643	INCOHERENT FILE filename FOR {OLD/NEW} REALM realmname:
- BACKUP-DATA DIFFER FROM DBDIR
	Meaning  The backup data in the new/old realm and in the DBDIR do not match. Response  Check if the databases (original or copy) to be checked are internally consistent and also consistent with each other. Otherwise, restore the database from a backup copy with the most recent consistent status.
- CREATION DATA DON’T MATCH WITH THE DATABASE
	Meaning  The CREATION data in the old realm and in the DBDIR do not match. Response  Check if the databases (original or copy) to be checked are internally consistent and also consistent with each other. Otherwise, restore the database from a backup copy with the most recent consistent status.
- DB-LAYOUT-VERSION OF REALM AND DBDIR NOT CONSISTENT
	Meaning  The layout version of the realm and the layout version of the database are inconsistent. Response  Check if the databases (original or copy) to be checked are internally consistent and also consistent with each other. Otherwise restore the last consistent state of the database from a backup.
- NUMBER OF PAGES IN AK0 NOT CONSISTENT
	Meaning  Administration information on the realm size and on the free space administration (FPA) are inconsistent. Response  Check if the databases (original or copy) to be checked are internally consistent and also consistent with each other. Otherwise restore the last consistent state of the database from a backup.
- VERSION-NR DIFFERS FROM DBDIR
	Meaning  The database version numbers in the old/new realm and in the DBDIR do not match. Response  Check if the databases (original or copy) to be checked are internally consistent and also consistent with each other. Otherwise, restore the database from a backup copy with the most recent consistent status.
- VERSION-NR DIFFERS FROM THAT OF THE OLD REALM
	Meaning The version numbers in the old realm and in the new realm do not match. Response Check if the databases (original or copy) to be checked are internally consistent and also consistent with each other. Otherwise, restore the database from a backup copy with the most recent consistent status.
3645	KEYVALUE CHECK NOT POSSIBLE, BECAUSE RECORD <recordname> / SET <setname> IS NOT PART OF ANY SUBSCHEMA Meaning A key value check is not possible because the specified record type or the specified set does not occur in any subschema.
3649	CHAIN OF FORMER AKN-PAGES BEGINNING AT PAGE p WITH n ENTRIES DOES NOT END WITH AKN-PAGE IN REALM realmname Meaning The chain of the former AKN pages does not end with the current AKN page. For the realm no more checks are done. Response Restore the database from a backup copy with the most recent consistent status.
3650	CHECK OF DISTRIBUTABLE SYSTEM LIST SET setname IS IMPOSSIBLE, BECAUSE NOT ALL REALMS OF RECORD recordname ARE SPECIFIED Meaning Not all realms of the specified record type which is a member of a distributable SYSTEM-LIST set are specified. The specified distributable SYSTEM-LIST set can therefore not be checked. Response When a distributable SYSTEM-LIST set is checked, all realms on which the member record set can reside must be specified.
3651	NOT CONSISTENT ACT-KEY-0 OR ACT-KEY-N ON REALM realmname: Meaning Error in the ALOG file. Response Check if the databases (original or copy) to be checked are internally consistent. Otherwise, restore the database from a backup copy with the most recent consistent status.
- BNR OF ACT-KEY-0/N IS WRONG
	Meaning  The page number in the act-key-0 page is not equal to 0, or the page number in the act-key-N page is not equal to n. Response  Check if the databases (original or copy) to be checked are internally consistent. Otherwise, restore the database from a backup copy with the most recent consistent status.
- FPA BEGIN DIFFERS FROM SIA
	Meaning  The page numbers of the first FPA page in the act-key-0 page and in the SIA do not match. Response  Check if the databases (original or copy) to be checked are internally consistent. Otherwise, restore the database from a backup copy with the most recent consistent status.
- PAGE LENGTH DIFFERS FROM SIA
	Meaning  Page lengths in the act-key-0 page and in the SIA do not match. Response  Check if the databases (original or copy) to be checked are internally consistent. Otherwise, restore the database from a backup copy with the most recent consistent status.
- PAGE-TYPE IS WRONG
	Meaning  The page type does not match that of the act-key-0. Response  Check if the databases (original or copy) to be checked are internally consistent. Otherwise, restore the database from a backup copy with the most recent consistent status.
- REALM-REF IS WRONG
	Meaning The realm references in the act-key-0 block and in the SIA do not match. Response Check if each database configuration to be checked is internally consistent. Otherwise, restore the database from a backup copy with the most recent consistent status.
3652	NOT CONSISTENT FPA ON FILE filename FOR REALM realmname, PAGE page-number Meaning Act-key of FPA page invalid. Response Restore the database from a backup copy with the most recent consistent status.
3653	LOCATION CHECK OF RECORD recordname IS IMPOSSIBLE, BECAUSE REALM realmname WITH THE DBTT OF THE RECORD IS NOT SPECIFIED Meaning A LOCATION CHECK is to be performed on a record whose DBTT is in a realm which has not been selected by the user. Response Include indicated realm name in REALM statement and restart BCHECK.
3654	LOCATION CHECK OF RECORD recordname IS IMPOSSIBLE, BECAUSE NOT ALL REALMS WITH RECORD OCCURRENCES ARE SPECIFIED Meaning A LOCATION CHECK is to be performed on a record type for which not all the realms it is part of have been selected by the user. Response Correct RECORD statement and restart BCHECK.
3655	CHECK OF {SET/KEY} setref/keyref IS IMPOSSIBLE, BECAUSE NOT ALL REALMS WITH {OWNER-RECORD/MEMBER-RECORD/RECORD/TABLE}-OCCURRENCES ARE SPECIFIED Meaning A check is to be performed on a set/key whose member/owner/record/table are within realms which are not specified in the realm statement. Response Correct SET/KEY statement and restart BCHECK.
3656	TABLE CHECK OF {SET/KEY} setref/keyref IS IMPOSSIBLE, BECAUSE REALM realmname WITH THE TABLE IS NOT SPECIFIED Meaning A check is to be performed on a key whose duplicates table is part of a realm which has not been selected by the user. A check is to be performed on a set/key whose table is part of a realm which has not been selected by the user. Response Correct SET, KEY or REALM statement and restart BCHECK.
3657	CHECK OF SET setname IS IMPOSSIBLE, BECAUSE REALM realmname WITH THE SYSTEM-RECORD IS NOT SPECIFIED Meaning A check is to be performed on a singular set whose anchor record is part of a realm which has not been selected by the user. Response Correct statement and restart BCHECK.
3658	ERROR IN SORTCORE-STATEMENT. [SORTCORE-STATEMENT IGNORED] Meaning Syntax error in the SORTCORE statement. Response The statement can be corrected interactively. In batch mode, the statement should be corrected and BCHECK restarted.
3659	CHECK OF RECORD recordname IS IMPOSSIBLE, BECAUSE NOT ALL REALMS ARE SPECIFIED Meaning Not all realms are specified for the specified record type. Consequently no check can be made. Response When a record type which is a member of a distributable SYSTEM-LIST set is checked, all realms must be specified on which the record type can reside.
3660	WRONG REALM-REF IN ACT-KEY-0 OR ACT-KEY-N OF DATASET filename Meaning Realm reference is smaller than 0, exceeds the maximum permissible value, or does not match the realm reference for the realm name specified by the user in the SIA. Response Restore the database from a backup copy with the most recent consistent status.
3661	SIA NOT CONSISTENT: NR BUCKETS FOR {CALC-RECORD/CALC-KEY} recref/keyref IS ZERO Meaning The number of CALC buckets for the CALC record/CALC key is 0. Response Restore the database from a backup copy with the most recent consistent status.
3662	SIA NOT CONSISTENT: KEYLENGTH FOR {CALC/RECORD/CALC-KEY} recref/keyref IS ZERO Meaning The key length for the CALC record/CALC key in the SIA is 0. Response Restore the database from a backup copy with the most recent consistent status.
3663	SIA NOT CONSISTENT: REALM-REF FOR {CALC-RECORD/CALC-KEY} recref/keyref TOO BIG, MAXIMUM REALM-REF IS max Meaning The realm reference for the primary bucket in the SIA exceeds the maximum permitted value. Response Restore the database from a backup copy with the most recent consistent status.
3664	SIA NOT CONSISTENT: BNR OF {FIRST/LAST} BUCKET FOR {CALC-RECORD/CALC-KEY} recref/keyref TOO BIG OR ZERO, MAXIMUM BNR IS max Meaning The page number of the first/last bucket of the CALC record/CALC key in the SIA is 0 or exceeds the maximum permissible value. Response Restore the database from a backup copy with the most recent consistent status.
3665	NOT CONSISTENT SIA OR WRONG HASHLIB. HASHREF hashref FOR {CALC-RECORD/CALC-KEY}recref/keyref DOES NOT EXIST Meaning The hash reference of the CALC record/CALC key entered in the SIA does not exist. Response Restore the database from a backup copy with the most recent consistent status.
3666	SIA NOT CONSISTENT: THE CALC-BLOCK(S) page-number - page-number ARE NOT SEPARATED FROM THE PREVIOUS ONE(S), REALM IS realmname Meaning The CALC areas overlap. Response Restore the database from a backup copy with the most recent consistent status.
3667	SIA NOT CONSISTENT: VALUE content OF FIELD itemname IS WRONG, RECORD IS recordname Meaning The field itemname in the SIA-RECORD-DESCRIPTION for the record type recordname contains an incorrect value content. Response Restore the database from a backup copy with the most recent consistent status.
3669	OLD {SORTCORE/CHECK/TYPE/SCHEMA}-STATEMENT IGNORED Meaning The statement entered has been repeated. The most recent entry is valid. Response None.
3670	SIA NOT CONSISTENT: ERROR IN CHAIN OF SYSTEM SETS Meaning The chain of SYSTEM sets in the SIA is faulty. Response Restore the database from a backup copy with the most recent consistent status.
3671	SIA NOT CONSISTENT: RECORD recordname IS NOT A MEMBER OF A DISTRIBUTABLE SYSTEM LIST SET Meaning The specified record type does not contain the indicator in the SIA that it is a member of a distributable SYSTEM-LIST set. Response Restore the database from a backup copy with the most recent consistent status.
3672	SIA NOT CONSISTENT: SET setname NOT WITH MODE IS LIST Meaning The specified set does not contain the indicator in the SIA that it is defined with MODE IS LIST. Response Restore the database from a backup copy with the most recent consistent status.
3673	SIA NOT CONSISTENT: RECORD recordname IS NO LIST RECORD Meaning The specified record type does not contain the indicator in the SIA that it is organized as a list. Response Restore the database from a backup copy with the most recent consistent status.
3674	SIA NOT CONSISTENT: KEY keyref DOES NOT BELONG TO A LIST SET, IS NOT INDEXED OR IS A SEARCH KEY Meaning According to the SIA the specified key belongs to a set which is not defined with MODE IS LIST, has no index or is a SEARCH-KEY although it is the sort key of a distributable SYSTEM-LIST set. Response Restore the database from a backup copy with the most recent consistent status.
3675	SIA NOT CONSISTENT: KEY keyref DOES BELONG TO A LIST SET OR IS NOT A SEARCH KEY Meaning According to the SIA the specified key belongs to a set which is defined with MODE IS LIST or is not a SEARCH-KEY although it is not the sort key of a distributable SYSTEM-LIST set. Response Restore the database from a backup copy with the most recent consistent status.
3676	SIA NOT CONSISTENT: {TABLE/PREFERRED} REALM IS NOT SPECIFIED FOR SET setname Meaning No table realm/preferred realm is specified for the specified set in the SIA. Response Restore the database from a backup copy with the most recent consistent status.
3677	SIA NOT CONSISTENT: BUCKETS FOR CALC KEY keyref IS NOT ON THE TABLE REALM realmname Meaning The specified CALC key does not reside in the table realm. Response Restore the database from a backup copy with the most recent consistent status.
3678	SIA NOT CONSISTENT: RECORD recordname IS MEMBER OF A DISTRIBUTABLE SYSTEM LIST SET, BUT HAS A DIRECT CALC KEY Meaning Although the specified record type is a member of a distributable SYSTEM-LIST set, it has no direct CALC key. Response Restore the database from a backup copy with the most recent consistent status.
3679	INPUT input READ WHEN KEYWORD EXPECTED Meaning A requested entry has not been made in a control statement. Response The statement can be corrected interactively. In batch mode, the statement should be corrected and BCHECK restarted.
3680	REALM realmname ON TAPE IS NOT PROCESSABLE Meaning The indicated realm is located on tape and can therefore not be processed. Response Transfer realm from tape to hard disk.
3682	SIA NOT CONSISTENT: BUCKETS OF CALC KEY keyref ARE ON MORE THAN ONE AREA Meaning Hash areas exist on more than one realm for the specified CALC key of a distributable SYSTEM-LIST set. Response Restore the database from a backup copy with the most recent consistent status.
3683	SIA NOT CONSISTENT: {MORE THAN ONE/NO} DISTRIBUTABLE SYSTEM LIST SET FOR RECORD recordname Meaning There is more than one/no distributable SYSTEM-LIST set for the specified record type. Response Restore the database from a backup copy with the most recent consistent status.
3684	SIA NOT CONSISTENT: MEMBER RECORD recordname OF THE DISTRIBUTABLE SYSTEM LIST SET setname IS NOT ON SEVERAL REALMS Meaning The specified member record type of a distributable SYSTEM-LIST set cannot reside on more than one realm. Response Restore the database from a backup copy with the most recent consistent status.
3685	SIA NOT CONSISTENT: RECORD recordname NOT ON THE {TABLE/PREFERRED} REALM realmname Meaning The specified record type does not reside in the table realm/preferred realm. Response Restore the database from a backup copy with the most recent consistent status.
3686	SIA NOT CONSISTENT: ONLY A SYSTEM SET CAN BE A DISTRIBUTABLE SYSTEM LIST SET: setname Meaning The specified regular set cannot be a distributable SYSTEM-LIST set. Response Restore the database from a backup copy with the most recent consistent status.
3687	REALM-LAYOUT-VERSION OF realmname IS WRONG: version; EXPECTED IS {004.00} Meaning The specified realm has layout version 005.00 although it contains no distributable SYSTEM-LIST sets. Response Restore the database from a backup copy with the most recent consistent status. REALM-LAYOUT-VERSION OF realmname IS WRONG: version; EXPECTED IS {005.00} Meaning The specified realm has layout version 004.00 although it contains distributable SYSTEM-LIST sets. Response Restore the database from a backup copy with the most recent consistent status.
3688	DB-LAYOUT-VERSION IS WRONG: version; EXPECTED IS {004.00} Meaning The database has layout version 005.00 although it contains no distributable SYSTEM-LIST sets. Response Restore the database from a backup copy with the most recent consistent status. DB-LAYOUT-VERSION IS WRONG: version; EXPECTED IS {005.00} Meaning The database has layout version 004.00 although it contains distributable SYSTEM-LIST sets. Response Restore the database from a backup copy with the most recent consistent status.
8695	ERROR AT SORT-OPEN, R-CODE = retcode Meaning The primary allocation specified for the sort file is too small regarding the SORTCORE parameter. Response Correct SORTCORE statement or increase primary allocation for sort file; then restart BCHECK.
8696	ERROR AT SORT-IN, R-CODE = retcode - DMS-CODE = dmscode Meaning The primary or secondary allocation specified for the sort file is too small regarding the SORTCORE parameter. Response Correct SORTCORE statement or increase primary allocation for sort file; then restart BCHECK.
8697	ERROR AT SORT-OUT, R-CODE = retcode Meaning The sort file has been dimensioned correctly as far as the SORTCORE parameter is concerned, but is too small and cannot be further expanded. Response Increase primary or secondary allocation for sort file; then restart BCHECK.
8699	INTERNAL ERROR IN modul (...) Meaning An internal error has occurred. Response Submit error report for diagnosis.