Your Browser is not longer supported

Please use Google Chrome, Mozilla Firefox or Microsoft Edge to view the page correctly
Loading...

{{viewport.spaceProperty.prod}}

Example in menu mode

&pagelevel(5)&pagelevel



Call
IMON

IMON is started once English is set as the task-wide language for messages and masks. After loading the program and entering [DUE], IMON switches to the menu mode. The IMON welcome screen appears first.

/modify-msg-attributes task-language=e
/start-imon
% IMOLOAD Program 'IMON-TU', version 'V03.4' of 2021-02-22' loaded from fil
e ':I29A:$TSOS.SYSLNK.IMON-BAS.034.TU'
% IMOCOPY Copyright (C) Fujitsu Technology Solutions 2021 All Rights Reserved
PLEASE ACKNOWLEDGE

The welcome screen describes the menu items for the first two steps of the installation when the standard SCI or foreign SCI is used.

   File  Edit  Show  View  Options                                              
 ------------------------------------------------------------------------------ 
                              IMON: Welcome screen                              
 ------------------------------------------------------------------------------ 
                                                                                
                        *** Welcome in Installation MONitor  ***                
                                                                                
                        Use menu                                                
                        File: Open: Standard SCI                                
                        to display standard SCI contents.                       
                                                                                
                        Use menu                                                
                        File: Open: SOLIS2 delivery                             
                        to install a delivery in standard SCI.                  
                                                                                
                        Use menu                                                
                        File: Open: Foreign SCI                                 
                        and then menu                                           
                        File: Open: SOLIS2 delivery                             
                        to install a delivery in a foreign SCI                  
                                                                                
 ------------------------------------------------------------------------------ 
 Command ==>                                                                    
 F1=Help  F3=Exit  F10=Menu  F12=Cancel    

Open
SCI

Since no SCI has been opened explicitly yet, the standard SCI on the home pubset is opened implicitly when the delivery is opened any time thereafter (see also the information on the welcome screen). The explicit opening of the standard SCI is displayed for the customer specific installation (see "Example in menu mode "). There you will also see that the SCI contains 163 entries, i.e. 168 installation items, before installation.

Specify
work
file ID

The preset for the work file ID is used in this example. The ability to set the work file ID through the Options menu is shown for the installation on an imported pubset, for example, on "Example in menu mode ".
When opening the delivery in the “SOLIS2 Delivery” dialog box the preset work file ID is displayed as a partially qualified path name with catalog ID (in this case with :I29A:$SYSSAG., see "Example in menu mode ").

Open
SOLIS2
delivery

The delivery should then be opened: Option 1 (Open) is already preset in the File menu. The mask is executed using [DUE].

   File  Edit  Show  View  Options                                              
 ------------------------------------------------------------------------------ 
 : 1 1. Open ...                : : Welcome screen                              
 :   *. Close                   : --------------------------------------------- 
 :   *. Print documentation ... :                                               
 :   *. Save as ...             : e in Installation MONitor  ***                
 :   5. Exit                    :                                               
 :..............................:                                               
                        File: Open: Standard SCI                                
                        to display standard SCI contents.                       
                                                                                
                        Use menu                                                
                        File: Open: SOLIS2 delivery                             
                        to install a delivery in standard SCI.                  
                                                                                
                        Use menu                                                
                        File: Open: Foreign SCI                                 
                        and then menu                                           
                        File: Open: SOLIS2 delivery                             
                        to install a delivery in a foreign SCI                  
                                                                                
 ------------------------------------------------------------------------------ 
 Command ==>                                                                    
 F1=Help  F3=Exit  F10=Menu  F12=Cancel    

Option 4 (SOLIS2 delivery) for opening the SOLIS2 delivery is preset. The mask is executed using [DUE].

   File  Edit  Show  View  Options                                              
 .......................................................... ------------------- 
 : 4 1. Standard software configuration inventory         :                     
 :   2. Foreign software configuration inventory ...      : ------------------- 
 :   3. Installation definition file ...                  :                     
 :   4. SOLIS2 delivery ...                               :  ***                
 :   5. Structure and installation information file ...   :                     
 :                                                        :                     
 :  F1=Help  F12=Cancel                                   :                                
 :........................................................:                     
                                                                                
                        Use menu                                                
                        File: Open: SOLIS2 delivery                             
                        to install a delivery in standard SCI.                  
                                                                                
                        Use menu                                                
                        File: Open: Foreign SCI                                 
                        and then menu                                           
                        File: Open: SOLIS2 delivery                             
                        to install a delivery in a foreign SCI                  
                                                                                
 ------------------------------------------------------------------------------ 
 Command ==>                                                                    
 F1=Help  F3=Exit  F10=Menu  F12=Cancel    

The following delivery information is then queried in the “SOLIS2 Delivery” dialog box that is opened: package name, user code, distribution medium (MTC 2). The set work file ID is displayed again in the lower section of the mask. This dialog box is executed using [DUE].

   File  Edit  Show  View  Options                                              
 .......................................................... ------------------- 
 :                          Open                          :                     
 .............................................................................. 
 :                              SOLIS2 delivery                               : 
 : -------------------------------------------------------------------------- : 
 : Package name.......: <package-name>                                        : 
 : User code..........: sol2p                                                 : 
 : Distribution medium: 2 1. SOLIS2 volume          2. Library                : 
 :                        3. Registered             4. Local volume           : 
 :                           Volume.....:                                     : 
 :                           Device type:                                     : 
 :                                                                            : 
 : Documentation library: 1 1. Standard            2. Other                   : 
 :           Name:                                                            : 
 : Work file location: :I29A:$SYSSAG.                                         : 
 : Reference File ...: :I29A:$TSOS.SYS.IMON.SCI.REF                           : 
 :                                                                            : 
 : Supply unit selection 1 1.Manually (*BY-DIALOG)                            : 
 :                         2.Automatically (*BY-CONFIGURATION)                : 
 : F1=Help  F12=Cancel                                                        : 
 :............................................................................: 
 Command ==>                                                                    
 F1=Help  F3=Exit  F10=Menu  F12=Cancel                                         

IMON then has all of the information needed to open the delivery on the data medium and it starts the processing operation, during which some messages are output to the screen:

IMON instructs ARCHIVE to read the specified MTC and extract files that are needed for the subsequent installation (e.g. product movement file, IMON and SOLIS2 program libraries). The “IMON” jobs started for this purpose create or expand the documentation library and start a print job for the acknowledge form. You can switch back to IMON menu mode using [DUE].


%  ARC0002 STATEMENT ACCEPTED. ARCHIVE SEQUENCE NUMBER 'A.100509.142557', VERSIO
N '12.0C00'
%  ARC0033 ARCHIVE SUBTASK TSN '0183' GENERATED
%  ARC0002 STATEMENT ACCEPTED. ARCHIVE SEQUENCE NUMBER 'A.100509.142610', VERSIO
N '12.0C00'
%  ARC0033 ARCHIVE SUBTASK TSN '0184' GENERATED
%  JMS0066 JOB 'IMON' ACCEPTED ON 21-04-09 AT 14:27, TSN = 0185
%  JMS0066 JOB 'IMON' ACCEPTED ON 21-04-09 AT 14:27, TSN = 0186
%PLEASE ACKNOWLEDGE

Confirm
supply
units

Five supply units were found on the specified MTC. IMON offers these for further processing (they are already highlighted). To select all of these supply units, execute the selection using [DUE].

   File  Edit  Show  View  Options                                              
 ------------------------------------------------------------------------------ 
    IMON: SOLIS2 delivery: Package name: <package-name>  User code: SOL2P        
 ------------------------------------------------------------------------------ 
                                           Units     1 through     5 of     5   
                               SU selection                         More:       
               Unit name               Version      Corr state                  
 X EDT                                   17.0          D30
 X OPENFT                                12.1          C10
 X OPENFT-CR                             12.1          B10
 X PERCON                                02.9          C00
 X SORT                                  08.0          A30
                        *** End of SU selection ***                             
   
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
 ------------------------------------------------------------------------------ 
 Command ==>                                                                    
 F1=Help  F3=Exit  F5=Previous  F6=Next  F7=Backward  F8=Forward  F10=Menu ...  

Select
install

You must then switch to the Edit menu to install the units. Option 4 (Install) is already preset and needs only to be confirmed with [DUE].

   File  Edit  Show  View  Options                                              
 ------------------------------------------------------------------------------ 
    IM : 4  *. Search ...                                 :  code: SOL2P        
 ----- :    *. Add ...                                    : ------------------- 
       :    *. Remove ...                                 : gh     5 of     5   
       :    4. Installed ...                              :         More:       
       :    *. Park ...                                   : te                  
 X EDT :    *. Generate installation definition file ...  :
 X OPE :    *. Deinstall ...                              :
 X OPE :    *. Undo ...                                   :
 X PER :    *. Activate ...                               :
 X SOR :    *. Check ...                                  :
       :    *. Request correction delivery ...            :
       :    *. Customer-Approved Install ...              :
       :..................................................:
                                                                                




                                                                 
 ------------------------------------------------------------------------------ 
 Command ==>                                                                    
 F1=Help  F3=Exit  F5=Previous  F6=Next  F7=Backward  F8=Forward  F10=Menu ...  

Select
parameter
file

The following default installation parameters options are preset by IMON in the “IMON parameter file” dialog box.

   File  Edit  Show  View  Options                                              
 ........................................................................ -----
 :                         IMON Parameter file :
 : -------------------------------------------------------------------- : -----
 : Parameter file ...: 2 1. None         2. Standard     3. Other       :  5
 : File name: :I29A:$TSOS.SYSPAR.IMON.LAST                              :
 :                                                                      :
 : Save parameters...: 1 1. No           2. Standard     3. Other       :
 :    File name:                                                        :
 :                                                                      :
 : F1=Help F12=Cancel                                                   :
 :......................................................................:
                        *** End of SU selection ***


                                                                                




                                                                 
 ------------------------------------------------------------------------------ 
 Command ==>                                                                    
 F1=Help  F3=Exit  F5=Previous  F6=Next  F7=Backward  F8=Forward  F10=Menu ...  

Parameter file:

  • IMON will use the default parameter file SYSPAR.IMON.LAST from the current location, when present, to preset specific installation parameters in the following dialog boxes (preset).

Save parameters:

  • No saving of the installation parameters will be performed (preset).

Specify
target
system

The following default installation settings are preset by IMON in the “Global installation parameters” dialog box.

   File  Edit  Show  View  Options                                              
 .............................................................................. 
 :                       Global installation parameters                       : 
 : -------------------------------------------------------------------------- : 
 : Target system                                                              : 
 :    BS2000 version..........: MM.N                                          : 
 :    Standard pubset.........: 1 1. Default            2. Other              : 
 : Save old files.............: 1 1. No                 2. With LMS           : 
 :                                3. With ARCHIVE       4. With MAREN         : 
 :                         VSN........:                                       : 
 :                         Device type:           MAREN location: *STD        : 
 : Undo preparation...........: 2 1. Yes                2. No                 : 
 : Placement mode.............: 1 1. Standard           2. Other              : 
 : Activation preparation mode: 1 1. Standard           2. Other              : 
 : Password file..............: 2 1. Yes                2. No                 : 
 :     File name....:                                                         : 
 :     Read password: C'      '                                               : 
 : Print log files............: 2 1. Yes                2. No                 : 
 : Start......................: 1 1. Immediately        2. By user            : 
 : Configuration checks.......: 1 1. Yes                2. No                 : 
 : Work file deleting.........: 1 1. Yes                2. No                 : 
 :                                                                            : 
 : F1=Help  F12=Cancel                                                        : 
 :............................................................................: 

MM.N - current version

Input for this example

Target system:

  • The supply units are to be installed for BS2000 current version (preset).

  • The supply units are to be installed on the default pubset, i.e. the home pubset (preset)

Save old files:

  • A “2” or “3” must be entered here to back up existing files that would be overwritten by the installation operation. Backup to an LMS library (option “2”) was selected for this example.

    The library will be created with the following name under the work file ID:
    IMON.SAVE.LIB.<package name>.<customer ID>
    i.e. in this example :I29A:$SYSSAG.IMON.SAVE.LIB. <package-name> .SOL2P

Undo preparation:

  • A”1” must be specified here to create a backup that will allow you to restore the original state before installation (see section "Undo - undoing an installation") The preset value “2” (i.e. no backup) was left unchanged in the example.

Placement mode:

  • The default placement option is retained

Activation preparation mode:

  • The default activation option is retained

Password file:

  • This specification need not be changed

Print log files:

  • This specification need not be changed: The logs are not to be printed out automatically once the installation is complete.

Start:

  • This specification need not be changed: The installation procedure generated by IMON is to be started immediately and automatically.

Configuration check:

  • This specification need not be changed: a configuration check should be executed.

Work file deleting:

  • The work files generated under the work file ID by IMON during the installation are not to be deleted once the installation is complete. A “2” is also entered, which is different than the preset value.

The dialog box is executed with these entries and [DUE].

   File  Edit  Show  View  Options                                              
 .............................................................................. 
 :                       Global installation parameters                       : 
 : -------------------------------------------------------------------------- : 
 : Target system                                                              : 
 :    BS2000 version..........: MM.N                                          : 
 :    Standard pubset.........: 1 1. Default            2. Other              : 
 : Save old files.............: 2 1. No                 2. With LMS           : 
 :                                3. With ARCHIVE       4. With MAREN         : 
 :                         VSN........:                                       : 
 :                         Device type:           MAREN location: *STD        : 
 : Undo preparation...........: 2 1. Yes                2. No                 : 
 : Placement mode.............: 1 1. Standard           2. Other              : 
 : Activation preparation mode: 1 1. Standard           2. Other              : 
 : Password file..............: 2 1. Yes                2. No                 : 
 :     File name....:                                                         : 
 :     Read password: C'      '                                               : 
 : Print log files............: 2 1. Yes                2. No                 : 
 : Start......................: 1 1. Immediately        2. By user            : 
 : Configuration checks.......: 1 1. Yes                2. No                 : 
 : Work file deleting.........: 2 1. Yes                2. No                 : 
 :                                                                            : 
 : F1=Help  F12=Cancel                                                        : 
 :............................................................................: 

Additional specifications are requested to select Installation items that belong to a certain hardware variant or a certain target system version with the “Target system parameters” dialog box.
The preset is 4 (All), i.e. the selection is made regardless of the hardware variant. The defaults displayed in the example are confirmed without change using [DUE]:

   File  Edit  Show  View  Options                                              
 .............................................................................. 
 :                       Global installation parameters                       : 
 : ............................................... -------------------------- : 
 : :          Target system parameters           :                            : 
 : : ------------------------------------------- :                            : 
 : : Processor-type: 4 1. CISC-390               :      2. Other              : 
 : :                   *. ---                    :      2. With LMS           : 
 : :                   3. X86                    :      4. With MAREN         : 
 : :                   4. All                    :                            : 
 : :                                             : AREN location: *STD        : 
 : : Item-selection: 2 1. All                    :      2. No                 : 
 : :                 2. Target-version-only      :      2. Other              : 
 : :                                             :      2. Other              : 
 : :                                             :      2. No                 : 
 : :   F12=Cancel                                :                            : 
 : :.............................................:      2. No                 : 
 : Print log files............: 2 1. Yes                2. No                 : 
 : Start......................: 1 1. Immediately        2. By user            : 
 : Configuration checks.......: 1 1. Yes                2. No                 : 
 : Work file deleting.........: 2 1. Yes                2. No                 : 
 :                                                                            : 
 : F1=Help  F12=Cancel                                                        : 
 :............................................................................: 

IMON
output

IMON has then queried all of the information needed to install the delivery and starts the processing operation during which some messages are output on the screen:

  • The :I29A:$SYSSAG.<package-name>.APR91450162021.IE installation procedure will be generated:

    • Five supply units were selected for installation.

    • Various processing steps must be generated.

    • Activation of the listed supply units is generated.

  • The installation procedure is then fully generated. It is started immediately and automatically.

Job ':I29A:$SYSSAG.<package-name>.APR91450162021.IE' is being generated. '5'
supply units have been selected
Generation of :I29A:$SYSSAG..APR91450162021.IE startet:
Generation of FSTAT-RENAME commands...
Generation of SAVE-FILES commands...
Generation of RESERVE-FILE commands...
Generation of IMPORT-FILE commands...
Generation of UPDATE-CATALOG-ENTRY commands...
Generation of library processing commands...
Generation of ADD-INSTALLATION-UNITS statements...
Generation of reference file...
SYSSII files processing started
Generation of ACTIVATE-UNIT commands for supply units:
  EDT             17.0   D30
  OPENFT          12.1   C10
  OPENFT-CR       12.1   B10
  PERCON          02.9   C00
  SORT            08.0   A30
Job ':I29A:$SYSSAG.<package-name>.APR91450162021.IE' has been generated and
entered
PLEASE ACKNOWLEDGE

Checking
the
installation
process

IMON switches back to menu mode once [DUE] is entered.

The SHOW-JOB-STATUS command can be used in the interactive task to check process whether the started installation task (job name “INSTALL”) is already finished. The procedure sequence can be checked in the installation log.
As the installation procedure is still running asynchronously, the supply units to be installed are in an undefined state and are not displayed in this mask.

As the installation procedure is still running asynchronously, the supply units to be installed are in an undefined state and are not displayed in this mask.
If a subset of the supply units in the delivery were installed and not the complete set, this mask would display those supply units that were not selected.

   File  Edit  Show  View  Options
 ------------------------------------------------------------------------------
    IMON: SOLIS2 delivery: Package name: <package-name>  User code: SOL2P
 ------------------------------------------------------------------------------
                                           Units     0 through     0 of     0
                               SU selection                         More:
               Unit name               Version      Corr state
                        *** End of SU selection ***













 ------------------------------------------------------------------------------ 
 Command ==>
 F1=Help  F3=Exit  F5=Previous  F6=Next  F7=Backward  F8=Forward  F10=Menu ...

Close
SOLIS2
delivery

Option 2 (Close ...) is preset in the File menu. The SOLIS2 delivery is closed with [DUE].

   File  Edit  Show  View  Options
 ------------------------------------------------------------------------------
 : 2 *. Open ...                : name: <package-name>  User code: SOL2P
 :   2. Close ...               : ---------------------------------------------
 :   3. Print documentation ... :            Units     0 through     0 of   0
 :   4. Save as ...             : selection
 :   5. Exit ...                :      Version      Corr state
 :..............................:  SU selection ***














 ------------------------------------------------------------------------------ 
 Command ==>
 F1=Help  F3=Exit  F5=Previous  F6=Next  F7=Backward  F8=Forward  F10=Menu ...

Checking
the SCI

After successful installation, 168 supply units are displayed in the SCI. The newly entered supply units are sorted in alphabetical order. They can be checked by scrolling forwards using “+” in the command line and [DUE] or [F8] .

In the following screen, the contents were scrolled forward to the new EDT entry. The EDT installation unit is entered in the SCI with its version and correction state.

   File  Edit  Show  View  Options
 ------------------------------------------------------------------------------
       IMON: SCI: :PH21:$TSOS.SYS.IMON.SCI
 ------------------------------------------------------------------------------
                                           Units    37 through    49 of   168
                          Installation units selection              More:  + -
               Unit name               Version      Corr state
   DPRINTCL                              01.2          A00
   DPRINTCM                              01.2          A00
   DPRINTSV                              01.2          A00
   DRIVE                                 03.1          A10
   DRIVE-COMP                            03.1          A10
   DRIVE-COMP-DOC                        03.1          A10
   DRIVE-COMP-LZS                        03.1          A10
   DRV                                   03.2          A02
   DSSM                                  21.0          A00
   DWS                                   11.0          A01
   EDT                                   17.0          D30
   ELFE                                  21.0          A00
   ELSA                                  01.7          A10

 ------------------------------------------------------------------------------ 
 Command ==> +
 F1=Help  F3=Exit  F5=Previous  F6=Next  F7=Backward  F8=Forward  F10=Menu ...

Naturally all other installation units in the delivery were entered also (cf. also the output after reopening the delivery, "Example in menu mode "). It was not possible to show a complete reproduction of the SCIs with the relevant masks here due to the space restrictions.`

Terminate
IMON

Installation of the SOLIS2 delivery is then complete. IMON itself can be terminated if no
other IMON functions are needed (e.g. displaying information or carrying out other installations).
IMON is terminated by entering 5 (Exit) in the File menu and [DUE] or [F3]).

   File  Edit  Show  View  Options
 ------------------------------------------------------------------------------
 : 5 1. Open ...                : IMON.SCI
 :   2. Close                   : ---------------------------------------------
 :   *. Print documentation ... :          Units    37 through    49 of   168
 :   4. Save as ...             : tion units selection              More:  + -
 :   5. Exit                    :      Version      Corr state
 :..............................:        01.2          A00
   DPRINTCM                              01.2          A00
   DPRINTSV                              01.2          A00
   DRIVE                                 03.1          A10
   DRIVE-COMP                            03.1          A10
   DRIVE-COMP-DOC                        03.1          A10
   DRIVE-COMP-LZS                        03.1          A10
   DRV                                   03.2          A02
   DSSM                                  21.0          A00
   DWS                                   11.0          A01
   EDT                                   17.0          D30
   ELFE                                  21.0          A00
   ELSA                                  01.7          A10

 ------------------------------------------------------------------------------ 
 Command ==> +
 F1=Help  F3=Exit  F5=Previous  F6=Next  F7=Backward  F8=Forward  F10=Menu ...

Checking
the  work
file 
ID

Files remain under the SYSSAG work file ID once the installation is concluded. As stipulated in the “Global installation parameters” dialog box (see "Example in menu mode "), they were not deleted automatically.

/show-file-attributes $syssag.
        48 :I29A:$SYSSAG.A.SOLIS.B.<package-name>.SOL2P
     15744 :I29A:$SYSSAG.IMON.SAVE.LIB.<package-name>.SOL2P
         9 :I29A:$SYSSAG.RMS.OPT.ADM
        54 :I29A:$SYSSAG.RMS.OPT.DOC
       327 :I29A:$SYSSAG.SOLIS.LMSCONV
        24 :I29A:$SYSSAG.SOLLIB.IMON.PBD
        24 :I29A:$SYSSAG.SOLLIB.IMON.SYSSII
       420 :I29A:$SYSSAG.SOLLIB.IMON.020
      3939 :I29A:$SYSSAG.SOLLIB.SOLIS2.050
      3939 :I29A:$SYSSAG.SOLLIB.SOLIS2.050.RMS.071
       495 :I29A:$SYSSAG.SOLPAR.IMON.034.GEN
      1596 :I29A:$SYSSAG.SOLPAR.SOLIS2.050.AUSGEN
        72 :I29A:$SYSSAG.SOLPAR.SOLIS2.050.FMSG
       306 :I29A:$SYSSAG.SOLPRG.SOLIS2.050.GEN
         3 :I29A:$SYSSAG.SYSREP.EDT.170
        12 :I29A:$SYSSAG.SYSREP.OPENFT.121
         3 :I29A:$SYSSAG.SYSREP.PERCON.029
        12 :I29A:$SYSSAG.SYSREP.SORT.080
         6 :I29A:$SYSSAG.<package-name>.DP
       303 :I29A:$SYSSAG.<package-name>.IC
         9 :I29A:$SYSSAG.<package-name>.APR91450142010.DP
         6 :I29A:$SYSSAG.<package-name>.APR91450162010.IA
        99 :I29A:$SYSSAG.<package-name>.APR91450162010.IE
        15 :I29A:$SYSSAG.<package-name>.APR91450162010.II
       210 :I29A:$SYSSAG.<package-name>.APR91450162010.IL
         9 :I29A:$SYSSAG.<package-name>.APR91450162010.IP
        30 :I29A:$SYSSAG.<package-name>.APR91450162010.IR
         3 :I29A:$SYSSAG.<package-name>.APR91450162010.I0
       456 :I29A:$SYSSAG.<package-name>.APR91450162010.SCI
       144 :I29A:$SYSSAG.<package-name>.APR91450162010.SCI.GPN
        12 :I29A:$SYSSAG.<package-name>.RETURN.LETTER
        96 :I29A:$SYSSAG.<package-name>.SOL2P.DOC
:I29A: PUBLIC:     32 FILES RES=    28735 FRE=     2403 REL==     2346 PAGES

Post
processing

For this example no manual post-processing is necessary (e.g. starting a product-specific procedure). Where manual post-processing is necessary, IMON displays messages to this effect on the console (these are also found in the installation protocol <package-name>.APR91450162021.IL or under the important console messages in the file <package-name>.IC work file ID).

The delivery information can tell you whether further postprocessing is required. It should be referred to once more in this regard.

Checking
the
installation


If the delivery was then opened once more (starting IMON, Open: SOLIS2 delivery menu), it should, as would be expected, exist in the SCI as a delivery that was already registered.
Therefore by entering “3” for the distribution medium in the following dialog box, it should be opened as a delivery that has already been registered (the package name and user code must also be specified).

   File  Edit  Show  View  Options                                              
 .......................................................... ------------------- 
 :                          Open                          :                     
 .............................................................................. 
 :                              SOLIS2 delivery                               : 
 : -------------------------------------------------------------------------- : 
 : Package name.......: <package-name>                                        : 
 : User code..........: sol2p                                                 : 
 : Distribution medium: 3 1. SOLIS2 volume          2. Library                : 
 :                        3. Registered             4. Local volume           : 
 :                           Volume.....:                                     : 
 :                           Device type:                                     : 
 :                                                                            : 
 : Documentation library: 1 1. Standard            2. Other                   : 
 :           Name:                                                            : 
 : Work file location: :I29A:$SYSSAG.                                         : 
 : Reference File ...: :I29A:$TSOS.SYS.IMON.SCI.REF                           : 
 :                                                                            : 
 : Supply unit selection 1 1.Manually (*BY-DIALOG)                            : 
 :                         2.Automatically (*BY-CONFIGURATION)                : 
 : F1=Help  F12=Cancel                                                        : 
 :............................................................................: 
 Command ==>                                                                    
 F1=Help  F3=Exit  F10=Menu  F12=Cancel                                         

The delivery is known in the SCI. All five supply units were already installed.

   File  Edit  Show  View  Options
 ------------------------------------------------------------------------------
    IMON: SCI: :I29A:$TSOS.SYS.IMON.SCI
 ------------------------------------------------------------------------------
                                           Units     1 through     5 of     5
                               SU selection                         More:
     Unit name   Vers Corr Package name   User code   Inst. Status    CAP Act
  EDT            17.0 D30  <package-name> SOL2P    Installed           N   Y
  OPENFT         12.1 C10  <package-name> SOL2P    Installed           N   Y
  OPENFT-CR      12.1 B10  <package-name> SOL2P    Installed           N   Y
  PERCON         02.9 C00  <package-name> SOL2P    Installed           N   Y
  SORT           08.0 A30  <package-name> SOL2P    Installed           N   Y
                        *** End of SU selection ***







 ------------------------------------------------------------------------------
 Command ==>
 F1=Help  F3=Exit  F5=Previous  F6=Next  F7=Backward  F8=Forward  F10=Menu ...