Example in menu mode

Call IMON	IMON is started once English is set as the task-wide language for messages and masks. IMON switches to menu mode once the program is loaded and [DUE] entered. /modify-msg-attributes task-language=e /start-imon % IMOLOAD Program 'IMON-TU', version 'V03.4' of 2021-02-22' loaded from fil e ':I29A:$TSOS.SYSLNK.IMON-BAS.034.TU' % IMOCOPY Copyright (C) Fujitsu Technology Solutions 2021 All Rights Reserved PLEASE ACKNOWLEDGE The welcome screen describes the menu items for the first two steps of the installation when the standard SCI or foreign SCI is used. File Edit Show View Options ------------------------------------------------------------------------------ IMON: Welcome screen ------------------------------------------------------------------------------ *** Welcome in Installation MONitor *** Use menu File: Open: Standard SCI to display standard SCI contents. Use menu File: Open: SOLIS2 delivery to install a delivery in standard SCI. Use menu File: Open: Foreign SCI and then menu File: Open: SOLIS2 delivery to install a delivery in a foreign SCI ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F10=Menu F12=Cancel
Open SCI	The standard SCI on the home pubset is to be opened: The 1 (Open ...) option is already preset in the File menu. The mask is executed using [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ : 1 1. Open ... : : Welcome screen : *. Close : --------------------------------------------- : *. Print documentation ... : : *. Save as ... : e in Installation MONitor *** : 5. Exit : :..............................: File: Open: Standard SCI to display standard SCI contents. Use menu File: Open: SOLIS2 delivery to install a delivery in standard SCI. Use menu File: Open: Foreign SCI and then menu File: Open: SOLIS2 delivery to install a delivery in a foreign SCI ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F10=Menu F12=Cancel In the Open menu, select 1 (Standard SCI) and confirm with [DUE]. File Edit Show View Options .......................................................... ------------------- : 1 1. Standard software configuration inventory : : 2. Foreign software configuration inventory ... : ------------------- : 3. Installation definition file ... : : 4. SOLIS2 delivery ... : *** : 5. Structure and installation information file ... : : : : F1=Help F12=Cancel : :........................................................: Use menu File: Open: SOLIS2 delivery to install a delivery in standard SCI. Use menu File: Open: Foreign SCI and then menu File: Open: SOLIS2 delivery to install a delivery in a foreign SCI ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F10=Menu F12=Cancel The screen displays the contents of the open standard SCI. It contains 163 entries, i.e. 163 installation units that can be viewed by scrolling backwards and forwards using +/- in the command line. Before you can select a menu function, you may need to delete from the command line any presetting caused by the scrolling operation. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SCI: :I29A:$TSOS.SYS.IMON.SCI ------------------------------------------------------------------------------ Units 1 through 13 of 168 Installation units selection More: + Unit name Version Corr state ACS 21.0 A00 AID 03.5 A00 AIDSYS 21.0 A00 AIDSYSA 21.0 A00 ANITA 21.0 A00 APACHE 02.4 A00 ARCHIVE 12.0 C00 ASE 21.0 A00 ASSEMBH 01.4 A10 ASSEMBH-GEN 01.4 A10 ASSTRAN 05.4 A00 ASTI 21.0 A00 ATS 05.3 A20 ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Define work file  ID	The following steps can be skipped when the default value for the work file ID is kept, as is the case in this example (continue then with “Open SOLIS2 Delivery”, "Example in menu mode "). The work file ID can be respecified by entering 2 (IMON Options) in the Options menu. Execute the mask using [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SCI: :I29A: : 2 1. Switch to SDF interface : ----------------------- : 2. IMON options ... : --------------------- :..............................: ough 13 of 168 Installation units selection More: + Unit name Version Corr state ACS 21.0 A00 AID 03.5 A00 AIDSYS 21.0 A00 AIDSYSA 21.0 A00 ANITA 21.0 A00 APACHE 02.4 A00 ARCHIVE 12.0 C00 ASE 21.0 A00 ASSEMBH 01.4 A10 ASSEMBH-GEN 01.4 A10 ASSTRAN 05.4 A00 ASTI 21.0 A00 ATS 05.3 A20 ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... The preset work file ID is displayed as a partial path name with a catalog ID (in this case with :I29A:$SYSSAG.). This default work file ID is accepted by entering [DUE]. File Edit Show View Options .............................................................. --------------- : IMON options : : ---------------------------------------------------------- : --------------- : Work file location: :I29A:$SYSSAG. : 13 of 168 : Reference file ...: : More: + : :I29A:$TSOS.SYS.IMON.SCI.REF : : : : F1=Help F12=Cancel : :............................................................: AIDSYSA 21.0 A00 ANITA 21.0 A00 APACHE 02.4 A00 ARCHIVE 12.0 C00 ASE 21.0 A00 ASSEMBH 01.4 A10 ASSEMBH-GEN 01.4 A10 ASSTRAN 05.4 A00 ASTI 21.0 A00 ATS 05.3 A20 ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Open SOLIS2 delivery	Now the delivery will be opened: The 1 (Open ...) option is already preset in the File menu. The mask is executed using [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ : 1 1. Open ... : IMON.SCI : 2. Close : --------------------------------------------- : *. Print documentation ... : Units 1 through 13 of 163 : 4. Save as ... : tion units selection More: + : 5. Exit : Version Corr state :..............................: 21.0 A00 AID 03.5 A00 AIDSYS 21.0 A00 AIDSYSA 21.0 A00 ANITA 21.0 A00 APACHE 02.4 A00 ARCHIVE 12.0 C00 ASE 21.0 A00 ASSEMBH 01.4 A10 ASSEMBH-GEN 01.4 A10 ASSTRAN 05.4 A00 ASTI 21.0 A00 ATS 05.3 A20 ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... Option 4 (SOLIS2 delivery) for opening the SOLIS2 delivery is preset. The mask is executed using [DUE]. File Edit Show View Options .......................................................... ------------------- : Open : : ------------------------------------------------------ : ------------------- : 4 *. Standard software configuration inventory : gh 13 of 163 : *. Foreign software configuration inventory ... : More: + : 3. Installation definition file ... : te : 4. SOLIS2 delivery ... : : 5. Structure and installation information file ... : : : : F1=Help F12=Cancel : :........................................................: APACHE 02.4 A00 ARCHIVE 12.0 C00 ASE 21.0 A00 ASSEMBH 01.4 A10 ASSEMBH-GEN 01.4 A10 ASSTRAN 05.4 A00 ASTI 21.0 A00 ATS 05.3 A20 ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... The following delivery information is then queried in the “SOLIS2 delivery” dialog box that is opened: package name, user code, distribution medium (MTC is preset), the VSN, and the MTC device type. The set work file ID is displayed again in the lower section of the mask. This dialog box is executed using [DUE]. File Edit Show View Options .......................................................... ------------------- : Open : .............................................................................. : SOLIS2 delivery : : -------------------------------------------------------------------------- : : Package name.......: <package-name> : : User code..........: sol2p : : Distribution medium: 1 1. SOLIS2 volume 2. Library : : 3. Registered 4. Local volume : : Volume.....: qe6171 : : Device type: tape-c4 : : : : Documentation library: 1 1. Standard 2. Other : : Name: : : Work file location: :I29A:$SYSSAG. : : Reference File ...: :I29A:$TSOS.SYS.IMON.SCI.REF : : : : Supply unit selection 1 1.Manually (*BY-DIALOG) : : 2.Automatically (*BY-CONFIGURATION) : : F1=Help F12=Cancel : :............................................................................: Command ==> F1=Help F3=Exit F10=Menu F12=Cancel IMON then has all of the information needed to open the delivery on the data medium and it starts the processing operation, during which some messages are output to the screen: IMON instructs ARCHIVE to read the specified MTC and extract files that are needed for the subsequent installation (e.g. product movement file, IMON and SOLIS2 program libraries). The “IMON” jobs started for this purpose create or expand the documentation library and start a print job for the acknowledge form. You can switch back to IMON menu mode using [DUE]. % ARC0002 STATEMENT ACCEPTED. ARCHIVE SEQUENCE NUMBER 'A.100509.142557', VERSIO N '12.0C00' % ARC0033 ARCHIVE SUBTASK TSN '0183' GENERATED % ARC0002 STATEMENT ACCEPTED. ARCHIVE SEQUENCE NUMBER 'A.100509.142610', VERSIO N '12.0C00' % ARC0033 ARCHIVE SUBTASK TSN '0184' GENERATED % JMS0066 JOB 'IMON' ACCEPTED ON 21-04-09 AT 14:27, TSN = 0185 % JMS0066 JOB 'IMON' ACCEPTED ON 21-04-09 AT 14:27, TSN = 0186 %PLEASE ACKNOWLEDGE
Confirm supply units	Five supply units were found on the specified MTC. IMON offers these for further processing (they are already highlighted). To select all of these supply units, execute the selection using [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 5 of 5 SU selection More: Unit name Version Corr state X EDT 17.0 D30 X OPENFT 12.1 C10 X OPENFT-CR 12.1 B10 X PERCON 02.9 C00 X SORT 08.0 A30 *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Select install	You must then switch to the Edit menu to install the units. Option 4 (Install) is already preset and needs only to be confirmed with [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ IM : 4 *. Search ... : code: SOL2P ----- : *. Add ... : ------------------- : *. Remove ... : gh 5 of 5 : 4. Installed ... : More: : 5. Park ... : te X EDT : *. Generate installation definition file ... : X OPE : *. Deinstall ... : X OPE : *. Undo ... : X PER : *. Activate ... : X SOR : *. Check ... : : *. Request correction delivery ... : : *. Customer-Approved Install ... : :..................................................: ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Select parameter file	The following default installation parameters options are preset by IMON in the “IMON parameter file” dialog box. File Edit Show View Options ........................................................................ ----- : IMON Parameter file : : -------------------------------------------------------------------- : ----- : Parameter file ...: 2 1. None 2. Standard 3. Other : 5 : File name: :I29A:$TSOS.SYSPAR.IMON.LAST : : : : Save parameters...: 1 1. No 2. Standard 3. Other : : File name: : : : : F1=Help F12=Cancel : :......................................................................: *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... Parameter file: IMON will use the default parameter file SYSPAR.IMON.LAST from the current location, when present, to preset specific installation parameters in the following dialog boxes (preset). Save parameters: No saving of the installation parameters will be performed (preset).  The following default installation settings are preset by IMON in the “Global installation parameters” dialog box.
Specify target system	File Edit Show View Options .............................................................................. : Global installation parameters : : -------------------------------------------------------------------------- : : Target system : : BS2000 version..........: MM.N : : Standard pubset.........: 1 1. Default 2. Other : : Save old files.............: 1 1. No 2. With LMS : : 3. With ARCHIVE 4. With MAREN : : VSN........: : : Device type: MAREN location: *STD : : Undo preparation...........: 2 1. Yes 2. No : : Placement mode.............: 1 1. Standard 2. Other : : Activation preparation mode: 1 1. Standard 2. Other : : Password file..............: 2 1. Yes 2. No : : File name....: : : Read password: C' ' : : Print log files............: 2 1. Yes 2. No : : Start......................: 1 1. Immediately 2. By user : : Configuration checks.......: 1 1. Yes 2. No : : Work file deleting.........: 1 1. Yes 2. No : : : : F1=Help F12=Cancel : :............................................................................: MM.N – current version Input for this example Target system: The supply units are to be installed for BS2000 MM.N (preset). The supply units are to be installed on the default pubset, i.e. the home pubset (preset) Save old files: A “2” or “3” must be entered here to back up existing files that would be overwritten by the installation operation. Backup to an LMS library (option “2”) was selected for this example. The library will be created with the following name under the work file ID: IMON.SAVE.LIB.<package name>.<customer ID> i.e. in this example :I29A:$SYSSAG.IMON.SAVE.LIB.<package-name>.SOL2P Undo preparation: A”1” must be specified here to create a backup that will allow you to restore the original state before installation (see section "Undo - undoing an installation"). The preset value “2” (i.e. no backup) was left unchanged in the example. Placement mode: The default placement mode should be changed to the customer’s requirements, therefore enter “2” here. Activation mode: The default activation mode should be changed to the customer’s requirements, therefore enter “2” here. Password file: This specification need not be changed Print log files: This specification need not be changed: The logs are not to be printed out automatically once the installation is complete. Start: This specification need not be changed: The installation procedure generated by IMON is to be started immediately and automatically. Configuration check: This specification need not be changed: A configuration check should be executed. Work file deleting: The work files generated under the work file ID by IMON during the installation are not to be deleted once the installation is complete. Therefore the default setting must be changed to “2”. The dialog box is executed with these entries and [DUE]. File Edit Show View Options .............................................................................. : Global installation parameters : : -------------------------------------------------------------------------- : : Target system : : BS2000 version..........: MM.N : : Standard pubset.........: 1 1. Default 2. Other : : Save old files.............: 1 1. No 2. With LMS : : 3. With ARCHIVE 4. With MAREN : : VSN........: : : Device type: MAREN location: *STD : : Undo preparation...........: 2 1. Yes 2. No : : Placement mode.............: 2 1. Standard 2. Other : : Activation preparation mode: 2 1. Standard 2. Other : : Password file..............: 2 1. Yes 2. No : : File name....: : : Read password: C' ' : : Print log files............: 2 1. Yes 2. No : : Start......................: 1 1. Immediately 2. By user : : Configuration checks.......: 1 1. Yes 2. No : : Work file deleting.........: 1 1. Yes 2. No : : : : F1=Help F12=Cancel : :............................................................................: Additional specifications are requested to select Installation items that belong to a certain hardware variant or a certain target system version with the “Target system parameters” dialog box. The preset is 4 (All), i.e. the selection is made regardless of the hardware variant. The defaults displayed in the example are confirmed without change using [DUE]. File Edit Show View Options .............................................................................. : Global installation parameters : : ............................................... -------------------------- : : : Target system parameters : : : : ------------------------------------------- : : : : Processor-type: 4 1. CISC-390 : 2. Other : : : *. --- : 2. With LMS : : : 3. X86 : 4. With MAREN : : : 4. All : : : : : AREN location: *STD : : : Item-selection: 2 1. All : 2. No : : : 2. Target-version-only : 2. Other : : : : 2. Other : : : : 2. No : : : F12=Cancel : : : :.............................................: 2. No : : Print log files............: 2 1. Yes 2. No : : Start......................: 1 1. Immediately 2. By user : : Configuration checks.......: 1 1. Yes 2. No : : Work file deleting.........: 2 1. Yes 2. No : : : : F1=Help F12=Cancel : :............................................................................:
Customize depot location	The following screen shows the placement parameters of the 5 supply units to be installed: File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 5 of 5 Supply units placement parameters More: Replace Force Unit name Vers Corr Catid Userid Prefix files Loc. EDT 17.0 D30 *DEF TSOS *NONE Y N OPENFT 12.1 C10 *DEF *STD *NONE Y N OPENFT-CR 12.1 B10 *DEF *STD *NONE Y N PERCON 02.9 C00 *DEF TSOS *NONE Y N SORT 08.0 A30 *DEF *STD *NONE Y N *** End of Supply units placement parameters *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... The installation ID “TSOS” is changed for the supply units EDT and PERCON to the user ID “OSID1”. All other presets are left unchanged: File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 5 of 5 Supply units placement parameters More: Replace Force Unit name Vers Corr Catid Userid Prefix files Loc. EDT 17.0 D30 *DEF osid1 *NONE Y N OPENFT 12.1 C10 *DEF *STD *NONE Y N OPENFT-CR 12.1 B10 *DEF *STD *NONE Y N PERCON 02.9 C00 *DEF osid1 *NONE Y N SORT 08.0 A30 *DEF *STD *NONE Y N *** End of Supply units placement parameters *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... There is a library for each of the EDT and SORT supply units that is a subsets of an alternative library. The libraries are to be installed and merged with the alternative library. To accomplish this, confirm the preset “Y” in the “Library” column without changing it: File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 2 of 2 Supply units placement parameters More: Unit name Vers Corr Librairies EDT 17.0 D30 Y SORT 08.0 A30 Y *** End of Supply units placement parameters *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Customize activation parameters	The screen below shows the activation parameters of the delivery to be installed: Global activation preparation parameters ---------------------------------------------------------------------------- IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ---------------------------------------------------------------------------- Syntax file processing.: 1 1. Yes 2. No SDF param file..: :I29A:$TSOS.SYSPAR.SDF Message file processing: 1 1. Yes 2. No MIP param file..: :I29A:$TSOS.SYSPAR.MIP.210 MES file........: :I29A:$TSOS.SYSMES.EKP.01 DSSM processing........: 1 1. Yes 2. No Catalog name....: :I29A:$TSOS.SYS.SSD.CAT.X Keep old version: 2 1. Yes 2. No RMS processing.........: 1 1. Depot+loaders 2. Depot only 3. No Depot location..: 1 1. Standard 2. Enforced Location: :I29A:$TSOS POSIX processing.......: 1 1. Cfg 2. All 3. No F1=Help F12=Cancel This option is changed from the default, i.e. the earlier DSSM versions are to be retained for the entire delivery and the user ID is changed from TSOS to USR for the RMS depot location: Global activation preparation parameters ---------------------------------------------------------------------------- IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ---------------------------------------------------------------------------- Syntax file processing.: 1 1. Yes 2. No SDF param file..: :I29A:$TSOS.SYSPAR.SDF Message file processing: 1 1. Yes 2. No MIP param file..: :I29A:$TSOS.SYSPAR.MIP.210 MES file........: :I29A:$TSOS.SYSMES.EKP.01 DSSM processing........: 1 1. Yes 2. No Catalog name....: :I29A:$TSOS.SYS.SSD.CAT.X Keep old version: 1 1. Yes 2. No RMS processing.........: 1 1. Depot+loaders 2. Depot only 3. No Depot location..: 1 1. Standard 2. Enforced Location: :I29A:$usr. POSIX processing.......: 1 1. Cfg 2. All 3. No F1=Help F12=Cancel The following screen then once more displays the activation parameters for the 5 supply units to be installed. The values can be changed separately for each supply unit. In this case however, they are confirmed unchanged: File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 5 of 5 Supply units activation preparation parameters More: Unit name Vers Corr SDF MSG SUB PSX EDT 17.0 D30 Y Y Y - OPENFT 12.1 C10 Y Y Y - OPENFT-CR 12.1 B10 - - - - PERCON 02.9 C00 Y Y Y - SORT 08.0 A30 Y Y Y - *** End of Supply units activation preparation parameters *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... The following screen then shows once more the supply units for which earlier subsystem versions will be retained. In terms of this activation parameter, in this case all of the displayed supply units are marked (here with “x”) and the selection is confirmed with [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 4 of 4 SU selection for keeping old subsystem versions More: Unit name Version Corr state X EDT 17.0 D30 X OPENFT 12.1 C10 X PERCON 02.9 C00 X SORT 08.0 A30 *** End of selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
IMON output	IMON has then queried all of the information needed to install the delivery and starts the processing operation during which some messages are output on the screen: The :I29A:$SYSSAG.<package-name>.APR101149532021.IE installation procedure will be generated: five supply units were selected for installation various processing steps must be generated activation of the listed supply units is generated. The installation procedure is then fully generated. It is started immediately and automatically. Job ':I29A:$SYSSAG.<package-name>.APR91450162021.IE' is being generated. '5' supply units have been selected Generation of :I29A:$SYSSAG.<packaga-name>.APR91450162021.IE startet: Generation of FSTAT-RENAME commands... Generation of SAVE-FILES commands... Generation of RESERVE-FILE commands... Generation of IMPORT-FILE commands... Generation of UPDATE-CATALOG-ENTRY commands... Generation of library processing commands... Generation of ADD-INSTALLATION-UNITS statements... Generation of reference file... SYSSII files processing started Generation of ACTIVATE-UNIT commands for supply units: EDT 17.0 D30 OPENFT 12.1 C10 OPENFT-CR 12.1 B10 PERCON 02.9 C00 SORT 08.0 A30 Job ':I29A:$SYSSAG.<package-name>.APR91450162021.IE' has been generated and entered PLEASE ACKNOWLEDGE
Checking the installation process	IMON switches back to menu mode once [DUE] is entered. The installation procedure runs asynchronously and outputs to the console messages relating to the processing steps executed and any errors that arose. The procedure sequence can be checked in the installation log. The SHOW-JOB-STATUS command can be used in the interactive task to check whether the started installation task (job name “INSTALL”) is already finished. The procedure sequence can be checked in the installation log. As the installation procedure is still running asynchronously, the supply units to be installed are in an undefined state and are not displayed in this mask. If a subset of the supply units in the delivery were installed and not the complete set, this mask would display those supply units that were not selected. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 0 through 0 of 0 SU selection More: Unit name Version Corr state *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Close SOLIS2 delivery	The SOLIS2 delivery is closed by entering 2 (Close ...) in the File menu and [DUE]. File Edit Show View Options ------------------------------------------------------------------------------ : 2 *. Open ... : name: <package-name> User code: SOL2P : 2. Close ... : --------------------------------------------- : 3. Print documentation ... : Units 0 through 0 of 0 : 4. Save as ... : selection : 5. Exit ... : Version Corr state :..............................: SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Checking the SCI	The SOLIS2 delivery is closed by entering 2 (Close ...) in the File menu and [DUE]. 168 supply units are then displayed in the SCI. The newly entered supply units are sorted in alphabetical order. They can be checked by scrolling forwards using “+” in the command line and [DUE] or [F8]. In the following screen, the contents were scrolled forward to the new EDT entry. The EDT installation unit is entered in the SCI with its version and correction state. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SCI: :PH21:$TSOS.SYS.IMON.SCI ------------------------------------------------------------------------------ Units 37 through 49 of 168 Installation units selection More: + - Unit name Version Corr state DPRINTCL 01.2 A00 DPRINTCM 01.2 A00 DPRINTSV 01.2 A00 DRIVE 03.1 A10 DRIVE-COMP 03.1 A10 DRIVE-COMP-DOC 03.1 A10 DRIVE-COMP-LZS 03.1 A10 DRV 03.2 A02 DSSM 21.0 A00 DWS 11.0 A01 EDT 17.0 D30 ELFE 21.0 A00 ELSA 01.7 A10 ------------------------------------------------------------------------------ Command ==> + F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ... Naturally all other installation units in the delivery were entered also (cf. also the output after reopening the delivery, "Example in menu mode "). It was not possible to show a complete reproduction of the SCIs with the relevant masks here due to the space restrictions.
Terminate IMON	Installation of the SOLIS2 delivery is then complete. IMON itself can be terminated if no other IMON functions are needed (e.g. displaying information or carrying out other installations). IMON is terminated by entering 5 (Exit) in the File menu and [DUE] (it can also be terminated via the [F3] function key): File Edit Show View Options ------------------------------------------------------------------------------ : 5 1. Open ... : IMON.SCI : 2. Close : --------------------------------------------- : *. Print documentation ... : Units 37 through 49 of 168 : 4. Save as ... : tion units selection More: + - : 5. Exit : Version Corr state :..............................: 01.2 A00 DPRINTCM 01.2 A00 DPRINTSV 01.2 A00 DRIVE 03.1 A10 DRIVE-COMP 03.1 A10 DRIVE-COMP-DOC 03.1 A10 DRIVE-COMP-LZS 03.1 A10 DRV 03.2 A02 DSSM 21.0 A00 DWS 11.0 A01 EDT 17.0 D30 ELFE 21.0 A00 ELSA 01.7 A10 ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...
Checking the  work file  ID	Files remain under the SYSSAG work file ID once the installation is concluded. As stipulated in the “Global installation parameters” dialog box, they were not deleted automatically. /show-file-attributes $syssag. 48 :I29A:$SYSSAG.A.SOLIS.B.<package-name>.SOL2P 15744 :I29A:$SYSSAG.IMON.SAVE.LIB.<package-name>.SOL2P 9 :I29A:$SYSSAG.RMS.OPT.ADM 54 :I29A:$SYSSAG.RMS.OPT.DOC 327 :I29A:$SYSSAG.SOLIS.LMSCONV 24 :I29A:$SYSSAG.SOLLIB.IMON.PBD 24 :I29A:$SYSSAG.SOLLIB.IMON.SYSSII 420 :I29A:$SYSSAG.SOLLIB.IMON.020 3939 :I29A:$SYSSAG.SOLLIB.SOLIS2.050 3939 :I29A:$SYSSAG.SOLLIB.SOLIS2.050.RMS.071 495 :I29A:$SYSSAG.SOLPAR.IMON.034.GEN 1596 :I29A:$SYSSAG.SOLPAR.SOLIS2.050.AUSGEN 72 :I29A:$SYSSAG.SOLPAR.SOLIS2.050.FMSG 306 :I29A:$SYSSAG.SOLPRG.SOLIS2.050.GEN 3 :I29A:$SYSSAG.SYSREP.EDT.170 12 :I29A:$SYSSAG.SYSREP.OPENFT.121 3 :I29A:$SYSSAG.SYSREP.PERCON.029 12 :I29A:$SYSSAG.SYSREP.SORT.080 6 :I29A:$SYSSAG.&ltltpackage-name>.DP 303 :I29A:$SYSSAG.<package-name>.IC 9 :I29A:$SYSSAG.<package-name>.APR91450142010.DP 6 :I29A:$SYSSAG.<package-name>.APR91450162010.IA 99 :I29A:$SYSSAG.<package-name>.APR91450162010.IE 15 :I29A:$SYSSAG.<package-name>.APR91450162010.II 210 :I29A:$SYSSAG.<package-name>.APR91450162010.IL 9 :I29A:$SYSSAG.<package-name>.APR91450162010.IP 30 :I29A:$SYSSAG.<package-name>.APR91450162010.IR 3 :I29A:$SYSSAG.<package-name>.APR91450162010.I0 456 :I29A:$SYSSAG.<package-name>.APR91450162010.SCI 144 :I29A:$SYSSAG.<package-name>.APR91450162010.SCI.GPN 12 :I29A:$SYSSAG.<package-name>.RETURN.LETTER 96 :I29A:$SYSSAG.<package-name>.SOL2P.DOC :I29A: PUBLIC: 32 FILES RES= 28735 FRE= 2403 REL== 2346 PAGES
Postprocessing	For this example no manual post-processing is necessary (e.g. starting a product-specific procedure). Where manual post-processing is required, IMON will display messages to this effect on the console (these are also found in the installation protocol <package-name>.APR101149532021.IL or under the important console messages in the file <package-name>.IC work file ID). The delivery information can tell you whether further postprocessing is required. It should be referred to once more in this regard. If the delivery was then opened once more (starting IMON, Open: SOLIS2 delivery menu), it should, as would be expected, exist in the SCI as a delivery that was already registered. Therefore by entering “3” in the following dialog box, it should be opened as a delivery that has already been registered.
C hecking the installation	File Edit Show View Options .......................................................... ------------------- : Open : .............................................................................. : SOLIS2 delivery : : -------------------------------------------------------------------------- : : Package name.......: <package-name> : : User code..........: sol2p : : Distribution medium: 3 1. SOLIS2 volume 2. Library : : 3. Registered 4. Local volume : : Volume.....: : : Device type: : : : : Documentation library: 1 1. Standard 2. Other : : Name: : : Work file location: :I29A:$SYSSAG. : : Reference File ...: :I29A:$TSOS.SYS.IMON.SCI.REF : : : : Supply unit selection 1 1.Manually (*BY-DIALOG) : : 2.Automatically (*BY-CONFIGURATION) : : F1=Help F12=Cancel : :............................................................................: Command ==> F1=Help F3=Exit F10=Menu F12=Cancel The delivery is known in the SCI. All five supply units were already installed. File Edit Show View Options ------------------------------------------------------------------------------ IMON: SOLIS2 delivery: Package name: <package-name> User code: SOL2P ------------------------------------------------------------------------------ Units 1 through 5 of 5 SU selection More: Unit name Vers Corr Park userid Install status EDT 17.0 D30 *NONE Installed OPENFT 12.1 C10 *NONE Installed OPENFT-CR 12.1 B10 *NONE Installed PERCON 02.9 C00 *NONE Installed SORT 08.0 A30 *NONE Installed *** End of SU selection *** ------------------------------------------------------------------------------ Command ==> F1=Help F3=Exit F5=Previous F6=Next F7=Backward F8=Forward F10=Menu ...