The ASE (Auxiliary SERSLOG Extensions) subsystem permits automatic monitoring of critical system statuses, which are reflected in SERSLOG events. Threshold values can be defined for these events which, when they are exceeded, result in the events being logged in one of the following ways: in an internal buffer, by a message at the console, and/or via Remote Service. This logging can be restricted to selected SERSLOG events.
The following overview contains all the commands available to the system administrator for controlling software error logging. The commands are described in detail in the “Commands” manual [8].
Command | Function |
ADD-ASE-ELEMENT | Declares an ASE element |
MODIFY-ASE-PARAMETERS | Changes global ASE settings |
REMOVE-ASE-ELEMENT | Deletes ASE elements |
SHOW-ASE-ELEMENT | Displays ASE elements |
SHOW-ASE-LOGGING | Displays internal ASE logging data |
SHOW-ASE-PARAMETERS | Displays global ASE settings |
SHOW-ASE-STATUS | Provides ASE status information |
Table 20: Overview of the ASE commands