BCSWP: Switch PORT

Using this command, you change the assignment of lines to mnemonic device names. The mnemonic device name of the line is changed. If the line is in the “active” state, it is first deactivated and then reactivated after the device name has been changed.

BS2000 console	BS2000 SDF command	Command/ SOF file	SNMP management	Parameter service
x		x	x

List of valid command sources

BCSWP                                                                            

<line-name 1 .. 8>

,DEV = list-poss (2): <device 2 .. 4>

<line-name 1 .. 8>
Name of the line whose device name is changed.

DEV=...
Specifies the mnemonic device name of the line.
<device 2..4> consists of two to four alphanumeric characters. In BS2000 system generation the DVC statement defines the physical line on which the system named mn is accessed.

The following device types are possible:

1. mnemonic device name of the write device

2. mnemonic device name of the read device

Command logging

For reasons of compatibility, the processing acknowledgment is supplied in news BCA0763 if it is positive and in news BCA0762 if it is negative, followed by the message NBR0740. In addition, for positive acknowledgments, the messages BCA08CF, BCA0854 and BCA0630 may also appear.
A description of the error messages that may be issued during command processing is provided in the table below. 

Command return codes

(SC2)      SC1	Maincode	Meaning
0        0	CMD0001	Command successfully processed
2        0	BCA0631	Switching aborted
0        1	BCA0768	Syntax error in command
0        1	BCA0770	Parameter invalid. Cause:
0       64	BCA0856	<x> is not included
0      128	BCA0814	BCAM is being terminated abnormally
0      128	BCA0816	BCAM is terminating
0      130	BCA0766	BCAM is not active