ROBAR V7.6 (en)

All actions of ROBAR and all reactions of the archive system are logged in the file robar.trace. Statistics can then be generated from this robar.tracefile (see section "ROBAR statistics").

Extract from a trace file (ABBA interface).

Example

RSV1057 Trace file (ROBAR ver>) created at  :  <date> <time>

<070628150356>  RSV1055 ROBAR session started 
                with EKS status 0, Configuration file test_sdlc_lto

<070628150400>  <--MAN :  H 1 SSS100 START     <S100,ACOM, ,ffff,1, ,
,vvvvvv,  ,aaaaaaaa,bbbbbbbb,uuuuuuuuu>
<070628150400>  -->ROB :  H 1 SSS100 START     <S100,ACOM, ,    ,1, ,   ,
,  ,        ,        ,28/150400>
<070628150400>  <--ROB :  H 1 SSS100 START     <S100,ACOM,P,M701,1, ,
,V03.11,  ,501A    ,NOTREADY,28/150400>
<070628150400>  -->CFG :                       AMU = ACTIVE ———————————  (1) 

<070628150400>  -->CON :  HD0 DDS100 ALLP
                         %  ROB0045 AMU-STATUS IS >ACTIVE< ————————————  (2) 
<070628150400>  -->CFG :                       ROB1 = ON
<070628150400>  <--MAN :  H   SSS101 START     <S101,ULK , ,ffff,1, ,
,vvvvvv,ss,00000000,        ,uuuuuuuuu>
<070628150400>  -->ROB :  H   SSS101 START     <S101,ULK , ,    ,1, ,   ,
,  ,00000000,        ,28/150400>
<070628150400>  <--ROB :  H   SSS101 START     <S101,ULK ,N,N401,1, ,   ,
,  ,00000000,        ,28/150400>
<070628150400>  <--MAN :  H   SSS102 START     <S102,ULK , ,ffff,1, ,
,vvvvvv,ss,0000TF01,        ,uuuuuuuuu>
<070628150400>  -->ROB :  H   SSS102 START     <S102,ULK , ,    ,1, ,   ,
,  ,0000TF01,        ,28/150400>
<070628150400>  <--ROB :  H   SSS102 START     <S102,ULK ,N,N401,1, ,   ,
,  ,0000TF01,        ,28/150400>
<070628150400>  <--MAN :  H   SSS103 START     <S103,ULK , ,ffff,1, ,
,vvvvvv,ss,0000TG01,        ,uuuuuuuuu>
<070628150400>  -->ROB :  H   SSS103 START     <S103,ULK , ,    ,1, ,   ,
,  ,0000TG01,        ,28/150400>
<070628150401>  <--ROB :  H   SSS103 START     <S103,ULK ,N,N401,1, ,   ,
,  ,0000TG01,        ,28/150400>
<070628150401>  <--MAN :  H   SSS104 START     <S104,ULK , ,ffff,1, ,
,vvvvvv,ss,0000TH01,        ,uuuuuuuuu>
<070628150401>  -->ROB :  H   SSS104 START     <S104,ULK , ,    ,1, ,   ,
,  ,0000TH01,        ,28/150401>
<070628150401>  <--ROB :  H   SSS104 START     <S104,ULK ,P,    ,1,1,
,FREI00,0L,0000TH01,        ,28/150401>
<070628150401>  <--MAN :  H   SSS105 START     <S105,ULK , ,ffff,1, ,
,vvvvvv,ss,0000TI01,        ,uuuuuuuuu>
<070628150401>  -->ROB :  H   SSS105 START     <S105,ULK , ,    ,1, ,   ,
,  ,0000TI01,        ,28/150401>
<070628150401>  <--ROB :  H   SSS105 START     <S105,ULK ,P,    ,1,1,
,FREI00,0L,0000TI01,        ,28/150401> ———————————————————————————————  (3) 
<070628150401>  <--MAN :  H   SSS106 START     <S106,AUTO, ,ffff,1,r,   ,
,  ,        ,        ,uuuuuuuuu>

<070628150401>  -->ROB :  H   SSS106 START     <S106,AUTO, ,    ,1, ,   ,
,  ,        ,        ,28/150401>
<070628150401>  <--ROB :  H   SSS106 START     <S106,AUTO,P,    ,1, ,   ,
,  ,        ,        ,28/150401>
<070628150401>  <--MAN :  H 1 SSS107 START     <S107,ROSA, ,ffff,1,1,   ,
,  ,        ,        ,uuuuuuuuu>
<070628150401>  -->ROB :  H 1 SSS107 START     <S107,ROSA, ,    ,1,1,   ,
,  ,        ,        ,28/150401>
<070628150401>  <--ROB :  H 1 SSS107 START     <S107,ROSA,P,    ,1,1,
,V03.11,  ,501A    ,NOTREADY,28/150401> ———————————————————————————————  (4)

(1)	Communication with the archive system is started (`ACOM`).
(2)	The “active” status of the archive system is reported to the BS2000 console `(-->CON).`
(3)	The status of the MTC devices administered by ROBAR is checked (`ULK`).
(4)	The robot is set to automatic (`AUTO`) and started (`ROSA`).

<070628150433>  <--CON :  HS1 SAT002 D17Z19    ROBA START-ATT TH
MFSAT
<070628150433>  -->CFG :  HS1 SAT002 D17Z19    'TH' attached
<070628150433>  -->CON :  HS1 SAT002 D17Z19    %  ROB0SAT FROM ROBAR VIEW 
TAPE CARTRIDGE TH   DEVICE IS ATTACHED
<070628150433>  <--CON :  HS1 SAT003 D17Z19    ROBA START-ATT TI
MFSAT
<070628150433>  -->CFG :  HS1 SAT003 D17Z19    'TI' attached
<070628150433>  -->CON :  HS1 SAT003 D17Z19    %  ROB0SAT FROM ROBAR VIEW 
TAPE CARTRIDGE TI   DEVICE IS ATTACHED ————————————————————————————————  (5) 
<070628150433>  <--CON :  HS1 SMT002 D17Z19    ROBA START-EMPTY TH
MFSMT
<070628150433>  <--CON :  HS1 SMT003 D17Z19    ROBA START-EMPTY TI
MFSMT —————————————————————————————————————————————————————————————————  (6) 
<070628150618>  <--CON :  NS1 000001 D17Z19    0HDM ?NKVT013 000062 TH
SPECIAL LIST TAPE-U4 ,VSN=000062                         MF023 ————————  (7) 
<070628150618>  -->ROB :  NS1 000001 D17Z19    <0001,MO  , ,
,1,1,0TH,000062, 1,        ,        ,28/150618> ———————————————————————  (8) 
<070628150631>  <--ROB :  NS1 000001 D17Z19    <0001,MO  ,P,
,1,1,0TH,000062, 1,01020803,00000301,28/150618> ———————————————————————  (9) 
<070628150631>  -->CON :  NS1 000001 D17Z19    %  ROB4008 TAPE CARTRIDGE 
MOUNTED (DEV=TH   / TSN=0HDM / VSN=000062) ———————————————————————————— (10) 
<070628150640>  <--CON :  HS1 000002 D17Z19      TM %NKVT010 000062 TH
MF009 ————————————————————————————————————————————————————————————————— (11)

(5)	The RRF entry `MFSAT` (`START-ATTACH`) is called for the devices `TH` and `TI` which are recognized as attached.
(6)	No volume is mounted on the devices `TH` and `TI`. The RRF entry `MFSMT` (`START-EMPTY`) is consequently called.
(7)	Message `NKVT013` must be processed. The corresponding RRF entry in this case is `MF023.`
(8)	ROBAR instructs the archive system to mount the requested cartridge `000062` on the device TH.
(9)	The archive system reports that cartridge `000062` has been mounted successfully (`P` for “positive”) on the device `TH`.
(10)	ROBAR reports the successful mounting operation to the BS2000 console `(ROB4008).`
(11)	The Tape Monitor Task (TM) reports that the label (tape label, SVL) of cartridge `000062` has been read successfully on the device `TH`. The RRF entry `MF009` is called.

<070628150640>  <--CON :  NS1 000003 D17Z19    0HDM %NKVT017 TH
MF017 ————————————————————————————————————————————————————————————————— (12) 
<070628150645>  <--CON :  NS1 000004 D17Z19      TM %NKVT097 000062 TH
MF005 ————————————————————————————————————————————————————————————————— (13) 
<070628150645>  -->ROB :  NS1 000004 D17Z19    <0004,KE  , ,    ,1,1,0TH,
,  ,        ,        ,28/150645>
<070628150716>  <--ROB :  NS1 000004 D17Z19    <0004,KE  ,P,
,1,1,0TH,000062,  ,00000301,01020803,28/150645> ——————————————————————— (14) 
<070628150716>  -->CON :  NS1 000004 D17Z19    %  ROB4004 TAPE CARTRIDGE 
DEVICE UNLOADED (DEV=TH   / VSN=000062) ——————————————————————————————— (15)

(12)	The BS20000 system reports `NKVT017`: the cartridge `000062` is now assigned to the task `0HDM`. The RRF entry `MF017` is called.
(13)	The BS20000 system reports the unloading of the cartridge `000062` on the device `TH` (`NKVT097`). The RRF entry `MF005` is called.
(14)	ROBAR causes the cartridge to be removed from the device and returned to its storage location (`KE`). This operation is acknowledged positively (`P`).
(15)	ROBAR reports the successful removal of the cartridge `000062` from the device `TH` to the BS2000 system with message `ROB4004`.

Meaning of entries

Column
1               17       27 29 31    38        48
|               |         | | |      |         | 
<070628150631>  -->CON :  NS1 000001 D17Z19    %  ROB4008 TAPE CARTRIDGE 
MOUNTED (DEV=TH   / TSN=0HDM / VSN=000062)

Col. 1:	Time stamp	(Format: `<yymmddhhmmss>`)
Col. 17:	Sender/receiver
	`<--CON:`	Message from BS2000 operator’s console to ROBAR
	`-->CON:`	Message from ROBAR to BS2000 operator’s console
	`<--MAN:`	Message from MANUAL mode (see "MANUAL Enter archive system commands manually") or start operation
	`<--ROB:`	Message from the archive system to ROBAR
	`-->ROB:`	Message from ROBAR to the archive system
	`-->ATOP:`	Message from ROBAR to the automatic operator
	`-->CFG:`	Configuration update (ATT/DET)
	`INPUT:`	Confirmation in simulation mode
	`IGNORED:`	Message has been ignored
	`WARNING:`	Timeout, barcode not readable, etc.
	`REPEAT:`	Job has been pended
	`RESTART:`	Restart
Col. 27:	Priority identifier (`H` (high) = prioritized job, `L` (low), `N` (normal)
Col. 29:	Robot number
Col. 31:	Job number (the last 4 digits are transferred to the archive system command)
	`nnnnnn:`	BS2000 job (6-character, numeric)
	`MMMnnn:`	Manually entered job (MANUAL)
	`SSSnnn:`	Job from connection setup
Col. 38:	Job submitter
	`xxxxxx:`	Name of the BS2000 system
	`ALLP:`	All BS2000 systems
	`ROBAR:`	ROBAR system (MANUAL mode)
	`START:`	ROBAR system (connection setup)
Col. 48:	Action or reaction (archive system command, return code, message text, etc.)

Your Browser is not longer supported

Please use Google Chrome, Mozilla Firefox or Microsoft Edge to view the page correctly

robar.trace