Managing a Data Network Public

You manage the public data networks (Data Network Public, DANPU) using the menu item Data Network Public in the IP networks menu. Up to eight DANPUs can exist per SE server. These are named DANPU01, DANPU02, etc.

DANPU01 is pre-configured, further DANPU networks are configured by the Customer Support staff.

Overview of all DANPUs

>	Select Hardware -> IP networks -> Data Network Public, Overview tab.

The tab displays information on all existing DANPUs of the SE server configuration.

If managing a Management Cluster, an additional Server column is displayed. It lists the SE servers and the DANPUs that belong to it.

All DANPU networks are listed in the tree structure, under the Hardware -> IP networks -> Data Network Public menu entry. If a Management Cluster is configured, each SE server has a <se server>(SE<model>) submenu containing its DANPU. You can use these DANPU entries to obtain detailed information on the various public data networks and manage them.

Overview of the various DANPUs

>	Select Hardware -> IP networks -> Data Network Public -> [<se server>(SE<model>) ->] DANPU<no>, Overview tab.

The Overview tab displays all information on the selected DANPU.

The following functions are available:

Displaying the MAC address

>	In the Net Unit information group click the MAC addresses icon (eye) by the required unit. The subsequent dialog box Display MAC addresses displays the unit's active MAC addresses.

Adding ports

>	In the Net Unit information group click Add ports, follow the instructions of the wizard, and select the required port.

Removing a port

>	In the Net Unit information group click the Delete icon by the required unit and confirm the action.