----- AUXILIARY FRAME: POWER STAND-BY/IMPL ----- E90L01G
FUNCTION=>
*1 POWER STAND-BY
*2 IMPL
CL-0 CPU-0 CHP-0 RUN
RA []-[]00
Figure 20: AUXILIARY FRAME: POWER STAND-BY/IMPL screen
By making an entry in this frame and pressing the ENTER key, you can switch the server off or re-initialize it.
FUNCTION => | The following function is selected after the corresponding number has been entered: |
1 | POWER STAND-BY | switches the Server Unit off; order: first devices connected to the PCI (Power Control Interface), then the servers (for further information on this see "Switching the SE700 / SE500 on and off" in the Basic Operating Manual [1]) |
2 | IMPL | executes IMPL |
After you have selected a function and pressed the ENTER key, the following prompt will appear:
*********************************** * * * ARE YOU SURE ? (ENTER Y OR N) N * * * ***********************************
CAUTION!
POWER STAND-BY or IMPL may not be executed during system operation! If this instruction is not heeded, BS2000 will be aborted!
> | Press the Y and ENTER keys to switch off the system or to execute an IMPL, or the N and ENTER keys to cancel the procedure. |