(LD) PROGRAM LOAD FRAME: BASIC

         ----- PROGRAM LOAD FRAME: BASIC -----       E90L01G
-LOAD FUNCTION-
 ==>
 *1 START AUTO
 *2 START FAST
 *3 START DIAL
 *4 START
 *5 SYSTEM DUMP
                                         *ENTER    EXECUTE
                                         *PF7      GO TO DETAIL-1
                                         *FR AU5   GO TO PRESET(AU5 FRAME)
          CL-0      CPU-0 CHP-0              RUN 
RA                                                       []-[]00

Figure 7: PROGRAM LOAD FRAME: BASIC screen

An IPL is executed by entering a load function and pressing the ENTER key. The predefined parameters in (AU5) AUXILIARY FRAME: LOAD PRESET are used.

LOAD FUNCTION ==>

The following function is selected after the corresponding number has been entered:

1	START AUTO	executes IPL: automatic startup
2	START FAST	executes IPL: fast startup
3	START DIAL	executes IPL: dialog startup
4	START	not used
5	SYSTEM DUMP	executes SLED

Frame-specific functions

ENTER

Executes IPL / SYSTEM DUMP

After making your entries in the mask and pressing the ENTER key, the following prompt will appear:

***********************************
*                                 *
* ARE YOU SURE ? (ENTER Y OR N) N *
*                                 *
***********************************

CAUTION!
The IPL must not be executed during system operation! If this instruction is not heeded, BS2000 will be aborted!

>	Press the Y and ENTER keys to execute the IPL, or N and ENTER to cancel the procedure.

Page up

Swap to PROGRAM LOAD FRAME: DETAIL-1 (see below)

FR AU5

Enters the frame command in line 24:
Swap to AUXILIARY FRAME: LOAD PRESET1 (see "(AU5) AUXILIARY FRAME: LOAD PRESET1")