Activate RADVD / DNS / NTP server

You can activate the RADVD / DNS / NTP server in the local MU for each DANPR:

>	Select Hardware -> IP networks -> Data Network Private -> DANPR<no>, Overview tab.
>	Click Activate RADVD / DNS / NTP server.
>	The Activate RADVD / DNS / NTP server dialog box opens. Click Activate.

In an SE server configuration with multiple MUs, this action is only available for the local MU (the MU on which you are logged in). To activate another MU, you have to switch to the SE Manager of that MU. In case of a global session: Switching is possible via the link in the header of the SE Manager.
For reasons of redundancy we recommend to activate the RADVD / DNS / NTP server on all MUs of the SE server configuration.

Note:
At least one port of the respective MU must be assigned to the network. The IP address column for already entered MUs displays the IPv6 address of the MU in the network. If you drag the mouse over the  icon, a tool tip informs you whether the entry is the local MU or a remote MU.