LED indicators for ports, system and power status

On Brocade ICX 6450 models LEDs indicate the status of the ports, of the system, and the power status of the device.

Port status LED indicator

Figure 38: Port status LED indicator (ICX 6450-24)

Figure 39: Port status LED indicator (ICX 6450-48)

(1) or (1) and (2) display the ports with status LEDs.

The following status indicators are possible:

LED	Display and meaning
Ethernet	Lights up green and flashes when the port is transferring and receiving data packets. Does not light up when no connection to a remote port exists.
SFP/SFP+ (X1-X4)	Lights up green when the port is transferring 10 Gbps. Lights up green and flashes when data packets are being transferred and received. Lights up yellow when the port is transferring 1 Gbps. Lights up yellow and flashes when data packets are being transferred and received. Does not light up when no connection to a remote port exists.
Out-of-band management port (2 LEDs)	Not used

Table 5: Meaning of the port status LED indicator

System status LED indicator

Figure 40: System status LED indicator

The information displayed by the system status LEDs is only relevant for the service technician. Information on the status of the Net Unit which is relevant for the customer is displayed by the SE Manager in the main menu Hardware  -> IP networks.

Power status LED indicator

Figure 41: Power status LED indicator (ICX 6450-24)

Figure 42: Power status LED indicator (ICX 6450-48)

(1) shows the power status LED.

The following status indicators are possible:

LED	Display and meaning
PWR (Power)	Does not light up when no power is supplied. Lights up green when the internal power supply (PSU) is functioning normally. Lights up yellow when the internal power supply has failed and power is being supplied from an external power supply (EPS).

Table 6: Meaning of the power status LED indicator