The Fujitsu Server BS2000 SE Series comprises several models whose total operating performance is determined by the number of CPUs in the Server Unit. All models have at least one CPU for the BS2000 operating system BS2000 OS DX.
A Fujitsu Server BS2000 of the SE Series (SE server for short) consists of the following components:
Management Unit (MU) with SE Manager
An autonomous server known as the "Management Unit" (MU) is integrated into the rack for monitoring and central operation of the system.
For SU /390 the MU performs SVP operation.
Remote service of the SE server is performed by means of AIS Connect (over the internet). For AIS Connect the Management Unit requires an internet access over the administration LAN. The customer operates the access for remote service via the SE Manager.Server Unit
A /390-based Server Unit (SU /390) as well as an x86-based Server Unit (SU x86) enables operation of BS2000 (Native BS2000 or VM2000).
In the basic configuration the SE server is equipped with one Server Unit:SE /390 in its basic configuration with one SU /390
Several models with 1 to 16 processors are available.- SE x86 in its basic configuration with one SU x86
The SU x86 provides BS2000 performance solely on the basis of x86 technology. Several models are available with 1 to 16 Xeon processor cores. In terms of processor performance, configurability and scalability of the monoprocessor performance, the SU x86 models range below the SU /390 models.
SE servers SE730 / SE730B can optionally be equipped with additional SU330s / SU330Bs. SE servers SE710, SE310, SE320 and SE330 / SE330B contain exactly one SU.
Net Unit, for SU /390 with HNC
Gigabit Ethernet Switches are integrated into the rack for internal communication. In the case of SE /390, the Net Unit is by default redundant in design. In the case of SE x86, redundancy of the Net Unit is optional. In the case of SE /390 one ore more HNCs provide the LAN connections for the SU /390.Rack console and KVM switch
Application Unit (AU)
Optionally up to 256 AUs can be operated on the SE server for customer applications. An x86-based AU permits operation under Linux, Windows, VMware ESXi or other hypervisors.Peripherals (storage)
Optional hardware components:
To store user data, optional disk storage systems can be installed in the basic racks and connected to SU x86: ETERNUS DX100 to SU310, SU320 and SU330 / SU330B.
Additional disk storage systems (e.g. ETERNUS DX or ETERNUS AF) can be connected to all Server Units via Fibre Channel.For backup of user data, tape libraries can optionally be installed in the basic racks and connected to SU x86: ETERNUS LT140 to SU310, SU320 and SU330 / SU330B.
ETERNUS CS8000 virtual tape libraries can be connected to all Server Units via Fibre Channel.- Rack-mountable storage systems and FC switches can be installed in the basic racks or extension racks if they are approved for use on Server Units or Application Units.
All components of the SE server are integrated into a joint rack (depending on the configuration, further racks are optionally possible). Information on the current hardware configuration of your SE server is displayed by the SE Manager in the Hardware -> HW inventory menu (see the "Operation and Administration" manual [5]).
Detailed information on the installation data, in particular on the dimensions and weights, is provided in the data sheet "Fujitsu Server BS2000 SE Series".
See the product site for the relevant server at https://www.fujitsu.com/emeia/products/computing/servers/mainframe/bs2000/:
> | Go to Fujitsu Server BS2000 and select the desired SE server model. |