BCOUT: Close down LAN node

BCOUT for LAN nodes

NODE = <node-name 1 .. 8>
,OUT = ONLY, ... / NODE, ... / ALL
	ONLY, ...
		|		DAC = ONLY / NODE / ALL
	NODE, ...
		|		DAC = NODE / ALL
,TYPE = QUICK / NORMAL, ...
	NORMAL, ...
		|		W = YES / NO

NODE=<node-name 1..8>
Name of the LAN node

OUT=...
Defines the group of objects that are closed down in addition to the LAN node.

OUT=ONLY, ...
The operation is only performed for the specified LAN node.

DAC=...
Specifies which objects are also deactivated.

DAC=ONLY
No additional objects are deactivated.

DAC=NODE
Deactivation takes place for the LAN node and all processors directly connected to the LAN, which can be accessed via the LAN node.

DAC=ALL
Deactivation takes place for all processors which can be accessed via the LAN.

OUT=NODE, ...
The operation is performed for the LAN node and all processors directly connected to the LAN, which can be accessed via the LAN node.

DAC=...
Specifies which objects are also deactivated.

DAC=NODE
No additional objects are deactivated.

DAC=ALL
Deactivation takes place for all processors which can be accessed via the LAN.

OUT=ALL
The operation is performed for all processors which can be accessed via the LAN.

TYPE=...
Specifies the type of connection shutdown.

TYPE=QUICK
Connection shutdown does not occur in the network.

TYPE=NORMAL, ...
A connection shutdown occurs in the network.

W=...
This operand shows whether or not a warning about the termination of the application is displayed.

W=YES
A warning is displayed.

W=NO
No warning is displayed.
This option must only be used in “emergencies”, since the relevant applications have no opportunity to terminate in a controlled manner.

Command logging

For reasons of compatibility, the processing acknowledgment is supplied in news BCA0763 if it is positive and in news BCA0762 if it is negative, followed by the message NBR0740. In addition, for positive acknowledgments, the messages BCA085E, BCA08D6 and BCA0626 may also appear.
A description of the error messages that may be issued during command processing is provided in the table below.

Command return codes

(SC2)      SC1	Maincode	Meaning
0        0	CMD0001	Command successfully processed
2        0	BCA0627	Shutdown aborted
2        0	BCA085C	BCOUT has already been entered, command is ignored
0        1	BCA0768	Syntax error in command
0       64	BCA07A3	LAN node is unknown
0      128	BCA0814	BCAM is being terminated abnormally
0      128	BCA0816	BCAM is terminating
0      130	BCA0766	BCAM is not active